If you have a newer G5 that has the PCIe you can get an X1900XT.
If you have an older PCI-X G5 I suggest getting a new Mac Pro.
You could use a DH2G on the X1900 and run three outputs but I don't recommend it.
A G5 can run 3 layers of SD without a faster disk or better video card. I strongly suggest a Mac Pro instead with an Mtron SSD and X1900XT.
SourceChildTODD SCRUTCHFIELD
...if it ain't broke...
gimme 5 and then don't act surprised
Ok, I for some reason cannot get the Decklink to work. Brand new decklink extreme HD. I have it in slot 2. When I called Blackmagic, they told me that it needed to be in slot 4. When I moved it up there, the Catalyst started running very slow. Like it would only play things back at 15FPS. And I mean like simple DV movies. When I moved it back to slot 2, the Catalyst started working like it should, but I still cannot get it to work. I can see the video using the Deck control software that came with the card, but when I go into Catalyst to set it up, I either get Black, or green lines.
Any thoughts?
I will put up some pics of this event, because it turned out to be really cool. I had to do some keystone correcting on 2 of the screens, and they client was blown away that it could do that.
Thanks for everyones support with this.
Lets backtrack a little here:
What mac do you have? G5/intel/2007/2008
What OS?
What version of Catalyst are you using?
What version of Decklink HD Extreme drivers are you using?
Can you post a 'support' PDF profile'
Were you trying to use the deckink control software at the same time as catalyst?
I've just configured an HD Extreme (old model without HDMI) for a client with no issues on a 2007 3.0G intel MacPro, using latest available drivers and m165 - card was in top slot and configured with the Expansion slot Utility in Tiger. Input and output was set to uncompressed SD-SDI
S
Simon Pugsley
SNP Productions Ltd. (UK)
Lighting & Video Control Solutions
Catalyst|Sales|Hire|Training|Support
Catalyst Dealer UK Europe & Worldwide...
Office: +44 (0)1908 410129
Mobile: +44 (0)7958 390034
simon@snp-productions.co.uk
www.snp-productions.co.uk
Ok, I will try and post a support PDF.
To answer some question, Brand New Mac Pro (came in 2 weeks ago)
8 - 3.0GHz core
2GB of Ram
32GB Mtron SSD
Nividia 8800 ( I think that is the graphics card, I am not in front of it right now)
OS 10.5.4
Catalyst m165
Decklink Extreme HD 6.8.1.
I have it in slot 2 right now, because when I put it in slot 4 and then put the catalyst in full screen, the second bar at the bottom ( sorry don't remember what it reads ) goes all the way up to 200% and every movie I have plays back at 15FPS no matter what format or size it is in. At one point i got the signal using the Blackmagic deck control software, but when I closed that and opened Catalyst, still nothing. I think the signal source may have not been right. After this show is over, I am going to look into it more. My bigger question is why Catalyst starts playing back slow when I put the Decklink card in the top slot. Do you think it has something to do with OS 10.5.4? If so, how would I get a copy of Tiger?
Thanks for the help.