Catalyst v4.4 m329

[escueto]

Hi Richard,
I am working with Catalyst m329 in GrandMA console, I created some libraries to work with Mix Type, etc.
I am having the following problem, I pass in more parameters but I put this as an example.


MIX Type
Ch6 MIX Screen Left - 16 bit
NO Change 0
Position 1 to 30000.

It often happens that if we have the Encoder in coarse mode and spent a 1, 2 etc and returning to 0 (1 step in coarse encoder 256 steps in fine) is not well reflected the movement, since a value 0 corresponds to no change .
Thus the mix is half display when they should be left completely.

This happens with all the parameters that have values of 0 and NO change.

Any suggestions?

Thanks
E. Cueto

[samsc]

Hi Richard,
I am working with Catalyst m329 in GrandMA console, I created some libraries to work with Mix Type, etc.
I am having the following problem, I pass in more parameters but I put this as an example.


MIX Type
Ch6 MIX Screen Left - 16 bit
NO Change 0
Position 1 to 30000.

It often happens that if we have the Encoder in coarse mode and spent a 1, 2 etc and returning to 0 (1 step in coarse encoder 256 steps in fine) is not well reflected the movement, since a value 0 corresponds to no change .
Thus the mix is half display when they should be left completely.

This happens with all the parameters that have values of 0 and NO change.

Any suggestions?

Thanks
E. Cueto

its absolutely essential to have a 'no change value'
otherwise you the poor end user -
have to program every single value to do something - to be a default- even when you dont need it-

you might just want to set one value in the mix setup -
but without a no change - you cant do this

[escueto]

its absolutely essential to have a 'no change value'
otherwise you the poor end user -
have to program every single value to do something - to be a default- even when you dont need it-

you might just want to set one value in the mix setup -
but without a no change - you cant do this

Would you please explain a little more the concept of -No change-.
Referred to Catalyst.
When I turn off the lamp from a moving light, select -Lamp OFF- and that if the default parameter of the lamp does -not change value-
If I release the parameters of the -Clear ALL- lamp will turn back on past time.
Here that I understand the value of "No change"

But do not know, to transfer this concept to a Catalyst Mixer.

Sorry for my ignorance.

[samsc]

Would you please explain a little more the concept of -No change-.
Referred to Catalyst.
When I turn off the lamp from a moving light, select -Lamp OFF- and that if the default parameter of the lamp does -not change value-
If I release the parameters of the -Clear ALL- lamp will turn back on past time.
Here that I understand the value of "No change"

But do not know, to transfer this concept to a Catalyst Mixer.

Sorry for my ignorance.

does not change values programmed already in catalyst gui


catalyst is not a lamp - it has its own cue lists and presets - and values