I'm trying to trigger Catalyst presets from the Vista Spyder X20.
The Spyder sends a UDP or TCP string in ASCII format to a user specified
port at a user specified IP address.
I'm trying to trigger Catalyst presets from the Vista Spyder X20.
The Spyder sends a UDP or TCP string in ASCII format to a user specified
port at a user specified IP address.
Last edited by nmotta; 20-03-2010 at 04:36 PM.
you can send a http web command?
to port 8080
or a midi note equivalent over tcpip
---
there are multiple different ways to trigger presets - the easiest is to use an http command- ( which is tcp html GET command - underneath )
goto the web server builtin-
on local machine- the presets page is-
http://localhost:8080/catws/presets.html
on remote machine use ip address
to trigger preset use this:
http://localhost:8080/commands/?RunPreset=1
GO
if you look at the address triggered from the "Go" button they are there-
or telnet to localhost:8080
type
Code:GET /commands/?RunPreset=2 HTTP/1.0
so basically you can use any tcpip based mechanism to 'telnet' into catalyst on port 8080- and type or run the command
the 'GET' simulates the http GET command- the 'HTTP/1.0' is the end of line for an http request.Code:GET /commands/?RunPreset=2 HTTP/1.0
example telnet capture shown here-
should be the exact same command format from spyder - http requests are just a special format of generic network commands.