Having problems with Triple Head to Go

[emilianomorgia]

I bought two th2g's as well hoping i'd be able to run 6 screens, i was not!
I have a quad core intel mac with a xt1900 video card, it runs 3 outputs fine on one th2g 3072 x 768 but when the 2nd th2g goes on there i cannot select a th2g see the th2g resolution for that output. I tried running the first th2g at a much lower res but didn't make a difference, does anyone have a graphics card they can suggest that would make this all work?

p.s.
They are analogue th2g's

strange .... i'm in a show right now using two triple for a total of 6 800x600

It worked fine on tiger and leo booth 2,66 and 3 giga I've tried this with many system configuration it always worked good ...

can you connect your mac pro to internet ?

do you have an ichat account ?

Can you post the system profile ?

[Mick Murray]

Am in japan with show at mo, will try it again when i get back, what software version are you running?

[emilianomorgia]

Am in japan with show at mo, will try it again when i get back, what software version are you running?

OSX 10.4x and 10.5x

Xt1900 on different kind of Mac Pro's

[Mr_P]

strange .... i'm in a show right now using two triple for a total of 6 800x600

It worked fine on tiger and leo booth 2,66 and 3 giga I've tried this with many system configuration it always worked good ...

Can you post YOUR profile - Are the TH2G Analogue or Digital

Do you use the Matrox GXM Control Panel?

What Graphics card did you use to get 6 outputs with 2 TH2G - have you done a firmware upgrade on it - what firmware version?

Which particular Mac Pro 2007 or 2008?

Did you have to configure 1 at a time or did both work straight away?

Were you running Tiger or Leopard when you had it working?


Answers - Answers - Answers

Thanks

S

[emilianomorgia]

Can you post YOUR profile - Are the TH2G Analogue or Digital

Analog

Do you use the Matrox GXM Control Panel?

I don't , it's useless. the system recognise the TH2g with or without GMX

What Graphics card did you use to get 6 outputs with 2 TH2G

xt1900

- have you done a firmware upgrade on it - what firmware version?

I never did an update I don't know what firmware version

Which particular Mac Pro 2007 or 2008?

Booth , I own a 2007 where I use two TH2g Analog, and I'm right now on a show with a 2008 using two digital TH2g and I get 6 800x600

Did you have to configure 1 at a time or did both work straight away?

Let's say there is no config you just select the res you need and if the TH2g it's hooked at startup the Os will give you back the same resolution at every start up

Were you running Tiger or Leopard when you had it working?

all the 10.4.x and all the 10.5.x worked fine on many different machines all with xt1900

[SourceChild]

Using digital TH2G on a 2nd Gen MacPro with Geforce 8800 I can output 6 screens at 1024x768 and 1280x1024. (2 Analog though are finicky).

Using analog or digital TH2G on 1st Gen MacPro with x1900 I can output 6 screens at 800x600.

Using analog or digital TH2G on 1st Gen MacPro with Quatro FX 4500 I can output 6 screens at 1024x768 and 1280x1024