refresh rate is 60 hz resolution is 3840x1024,3072x768, same defect, triple head display port on out one of quadro 4000 (display port )
refresh rate is 60 hz resolution is 3840x1024,3072x768, same defect, triple head display port on out one of quadro 4000 (display port )
second out connected to triple head DVI at 3840 x1024 is ok ,primary out connected to triple head Dysplay port at 3840 x 1024 is ok but only when catalyst not is in full sceen mode, also whit resolution more little i have same issue,the triple head display port do not work stable
i have tray whit 2400x 600,3072x768,3840x1024. Display port whitout triple head work ,i have try also triple head dvi whit adapter active displayport to dvi dual link , but resolution max for primary out is 2400x 600 second machine have 1 monitor for preview and 1 triple head DVI AT 3840X1024 for 3 screen and work well.I dont wont cut the big screen led 3660x1360 on two machine .
what settings are you using in the matrox powerdesk GXM control panel?
Have you checked matrox technical support about using 2 different types of triple head at the same time?
--
you need 4.5M pixels - there are other configurations that might work?
3 * 1920 * 1080 from a single triple head ( if this is possible ) ?
You will probably need more than one Catalyst machine to accomplish this.
I would recommend (x2) servers, each with a single TH2G and local monitor.
The spec NVIDIA lists for this card very clearly shows the maximum resolution to be: 2560x1600 @ 60Hz
http://www.nvidia.com/object/product...00-mac-us.html
Todd is correct in stating that the general rule is to not use more than one TH2G per machine or two DH2G.
Unless you are running at vey low resolution (x2) TH2G will most likely give you problems.
Hope this helps.
Best Regards,
- Marty
hi Richard, the technical guide says you can not use two different types of triple head under windows, but no restriction for mac user. yesterday i have update triple head DP whit software matrox but nothing change.in matrox power desk i have standard setting. I will try to use old catalyst quad core 3 ghz whit ge force 8800 for six out if possibile