I like Emiliano's idea.
Just make absolutely sure to put an isolated signal amp between the cable run and the adapter because the slightest little spike or any noise will fry your video card.
I like Emiliano's idea.
Just make absolutely sure to put an isolated signal amp between the cable run and the adapter because the slightest little spike or any noise will fry your video card.
SourceChildTODD SCRUTCHFIELD
...if it ain't broke...
gimme 5 and then don't act surprised
So something like the kramer vm-25, http://kramerelectronics.com/indexes...sp?name=VM-25?
Good choice. The 1021 is also fine. The point is to have a filtering device in the path. Even if you had a single TV you were driving. It's always good practice to use some sort of "gatekeeper."
Similar to the way you typically always have an opto-splitter at your stage rack for DMX.
SourceChildTODD SCRUTCHFIELD
...if it ain't broke...
gimme 5 and then don't act surprised
So i would also get away with a kramer pt102vn?
Chances are you'll be fine but when you plug a string of video devices together, you run the risk of noise and feedback. Some noise is okay but even if you don't visual see it, there could be damage done to your video cards as they are more delicate than other components in the chain. The isolated splitter is a good idea to protect your gear the same way you would use a surge protector.
it's not necessary though.
SourceChildTODD SCRUTCHFIELD
...if it ain't broke...
gimme 5 and then don't act surprised