nice image christian
nice image christian
try encoding with photojpeg.Originally Posted by litemover
its at least twice as fast as pixlet to decode.
and i cant spot the difference.
you will need to try encoding settings between 50% and 75%.
you will get more stable playback speeds- i think.
the stability of the playback speed with these codecs is well away from something i can control. its buried deep in quicktime.
there is nothing you can do except try photojpeg.Originally Posted by litemover
also syncing up with variable data rates is next to impossible.
you were brave to try.
i wish i could help - but the only thing that will help me is faster macs.
DVC Pro 50 is good though.Originally Posted by litemover
Twice the data rate - for those who complain about dv, and only just slower.
You can get 3 layers on a PAL system at 25fps, and 2 on at NTSC system at 30HZ.
In my testing it took around 11milliseconds to decode the DVCPRO 50 frames.
Thanks You.Originally Posted by samsc
CC
I would have though DANNY has told me not to and that photojpeg is not optimized for dual proccessors. He tols me that it would be slower. I'm going to start using photo Jpeg now, it looks alot nicer and I can work with it in RT while editing.Originally Posted by samsc
How bout the blackmagic codec Richard? I'd love to start using that codec as it is extremely fast to encode and great looking?
Best,
Christian Choi
Streatching it out to 720 doesn't look too bad either.Originally Posted by samsc
Christian
Photojpeg is slower than dv codecs at the same resolution and compression rate - by about twice-Originally Posted by litemover
DV doesnt work at any other resolution than 720x576 or 720x480. So you cannot use dv at 720p or 1080p.
You need to compare codecs that will do this....
this doesnt matter nearly so much when you are only playing one or 2 layers.
( you cannot playback 4 layers of photojpeg content. - it simply takes too long to decompress the frames.
If you need 4 layers to playback at 25/30fps you have NO choice but to use DV-NTSC (30fps) - there are no other options. Nothing else works. )
-
but at 1080p resolution photojpeg is 2 1/2 times faster than pixlet.
It takes 20milliseconds to decode one photojpeg 50% frame at 1080p res - 50ms for Pixlet 50%.
And at 720p resolution is takes 10ms for a photojpeg frame at 50%, and 20ms for a pixlet frame.
This chart shows single layer decompress times;
http://chaldee1.gotadsl.co.uk/~richa...ttachmentid=22
-
Blackmagic is just an uncompressed codec (YUV encoded ), nothing special- means huge files. And doing any kind of uncompressed work is really not noticeable in this environment- and its 60GB/hr - so you dont get much .
So this is the file to use if you have an 8 disc scsi array and need to do 1080p uncompressed. Data rate ~100-150MB/s!
-
Whether or not photojpeg is optimised for multiprocessors- is speculation from me based on reading between the lines of quicktime developer's documentation.
In this documentation - they talk about specific changes to the DV codec to optimise it for dual processors- they dont talk about other codecs like this.
DV -is the core codec for final cut and editing.
So it would make sense to use development resources to make this work as well as possible.
This document is "Whats new in QT 6.5". I dont think this information is in here - i think its in an earlier revision:
http://developer.apple.com/documenta...6_5/index.html
This is the form of the smoke signals one receives from apple.
Looks like I need to rerender and/or recapture and re-edit all my 720p content. Pixlet looks grainy to me so it will probably remain grainy even if I run it though cleaner. damn!Originally Posted by samsc
That bytes.
CC
Im going to try and do some testing in 5% increments from photo-jpeg 50% to 100% to see how the decode time changes.Originally Posted by litemover
You will have to do your own testing to determine the subjective factors.
Whether something looks more or less 'grainy' - is a subjective problem.
You will have to determine the point at which something is or is not acceptable for the usage you intend.
My testing of conversion tools seems to indicate that Compressor is a more reliable to way convert between codecs than Cleaner.
Cleaner seems to fuck with things more.
I saw no colour differences between any of the images when i rendered with 68 codec types using Compressor.