yes.
i got an error message from their driver - so im waiting for their reply.
yes.
i got an error message from their driver - so im waiting for their reply.
i confirm.
i'm working with LFG4 and under guide by Richard,i used
as-lfg-mac-sdk-v02_00_00.dmg and LFG direct driver 2.0.dmg
after enabled it all video input was ok.
Roberto Novelli HighEndSystem dealer for ITALY
Product Manager & Technical Support
roberto_novelli@ianiro.com
IANIRO ALDO srl.
helpdesk : ianiro@ianiro.com
http://www.ianiro.com
Sede principale/Head Office : Via Ragusa, 5
Logistica/Logistics : Via Ragusa, 3
00040 Pavona (Roma)- ITALY
+39 06 9310198 ra tel
+39 06 93162162 fax
ian i read on your profile this specs:
21:22:26 ian-parkins-computer : User picked Easy Install
Mar 2 21:22:26 ian-parkins-computer : Choices selected for installation:
Mar 2 21:22:26 ian-parkins-computer : Upgrade: "Active Silicon LFG VDig"
Mar 2 21:22:26 ian-parkins-computer : as-lfg_vdig-1_5.pkg : uk.co.activesilicon.lfgvdigx : 1.5.0.1.5
and this:
21:22:27 ian-parkins-computer : Preparing local booted disk
Mar 2 21:22:27 ian-parkins-computer : Create temporary directory "/private/tmp/as-lfg_vdig-1_5.pkg.210EJAWe6"
Mar 2 21:22:27 ian-parkins-computer : Processing Active Silicon LFG VDig:
and this:
Hardware: MacPro1,1 @ 2660 MHz (x4), 1024 MB
Mar 2 21:22:03 ian-parkins-computer : Running OS Build: 8N1250
Mar 2 21:22:03 ian-parkins-computer : Active Silicon LFG VDig Installation Log
Mar 2 21:22:03 ian-parkins-computer : Opened from: /Volumes/as-lfg_vdig-1_5/as-lfg_vdig-1_5.pkg
Mar 2 21:22:03 ian-parkins-computer : It took 0.627795 seconds to finish launching.
Mar 2 21:22:05 ian-parkins-computer : Distribution: Active Silicon LFG VDig
Mar 2 21:22:05 ian-parkins-computer : Installation checks completed successfully.
you have to unistall completely LFG Vdig drivers and reinstall the
drivers reiceved from Richard.
Uninstalling the Video Driver (VDIG)
You will need to know the root/Administrator password to perform a driver uninstall.
1. Open up a terminal window from a 'Finder' window:
Run '/Applications/Utilities/Terminal'.
2. Type the following commands exactly as shown:
sudo rm -rf /Library/QuickTime/lfgvdigx.component
sudo rm -rf /System/Library/Extensions/cdapci.kext
sudo rm -rf "/Library/Documentation/Active Silicon"
exit
3. Then close the terminal window, shutdown and restart the computer.
your error probability is ref. a different library cdapci.kext for not INTEL MAC.
Roberto Novelli HighEndSystem dealer for ITALY
Product Manager & Technical Support
roberto_novelli@ianiro.com
IANIRO ALDO srl.
helpdesk : ianiro@ianiro.com
http://www.ianiro.com
Sede principale/Head Office : Via Ragusa, 5
Logistica/Logistics : Via Ragusa, 3
00040 Pavona (Roma)- ITALY
+39 06 9310198 ra tel
+39 06 93162162 fax
thanks Roberto-
i think you are right - he installed the PPC version of the CDAPCI.kext.
richard
Richard,
I have now followed the instructions to uninstall the incorrect drivers and have reloaded those you provided. Unfortunately, o luck, Any idea's?
I have attached the latest pdf
thanks
Ian
you can see on your profile this:
DR (64.388)-** End Open Prefs - 58 3a
DR (64.401) -** Open Prefs SG 1- 59
LFG Direct mode not enabled
your direct drivers for LFG4 is not enable....
you can do it on CATALYST preferences
and in the config panel put flag on LFG4 direct driver.
this fix your problem.
bye.
Roberto Novelli HighEndSystem dealer for ITALY
Product Manager & Technical Support
roberto_novelli@ianiro.com
IANIRO ALDO srl.
helpdesk : ianiro@ianiro.com
http://www.ianiro.com
Sede principale/Head Office : Via Ragusa, 5
Logistica/Logistics : Via Ragusa, 3
00040 Pavona (Roma)- ITALY
+39 06 9310198 ra tel
+39 06 93162162 fax
Hi Roberto / Richard,
I may be missing something here, however, when I go to preference - video input, the box enable lfg direct api is enabled. Where do I go from here?
best regards
Ian
some some reason it's disable .Originally Posted by Ianp
PREF VideoInput/LFGDirectEnable -- OFF
PREF VideoInput/LFGBlueCut -- OFF
. this is not helpy in this case , but I suggest to run 4,6m111 in a new folder , do not run it in the same folder where older versions preference files was stored in .
Hi,
just tried the sw in a new folder and it still does not work.
Regards
Ian
where are you?