thanks.Originally Posted by emilianomorgia
how often did you see this?
thanks.Originally Posted by emilianomorgia
how often did you see this?
what do you mean vertical edge blending?Originally Posted by SourceChild
very often it drive me crazy . ( 9 on 10 )Originally Posted by samsc
I had two THTG so I've try to see if was problem of the device . even If the THTD was swapped problem persist .
Ah I was using Mac Osx 10.4.8 lasted QT lasted every thing .
E
Yeah Richard,
Vertical Edge Blending.
I was thinking a 2 x 3 Projector array that was edge blended.
The idea would be 6 SD projectors to get and HD image at the larger edge blended size
SourceChildTODD SCRUTCHFIELD
...if it ain't broke...
gimme 5 and then don't act surprised
This is official from MATROX WEB SITE.
You can have 3840x1024 (3 screen 1280x1024) with 1 output active and
1 THTG (triplehead2go) only.
with 2 output active you can have maximum
double for 2400x600 (6 screen 800 x 600)
Using offset and blending you can attach 6 submixes how you want.
I already install Matrox original driver and work correctly.
I checked with and without matrox driver,no error detected
using MAC PRO 4 x 2.66 Ghz xeon cpu's with Ati Radeon X1900-512Mb
Tested on 5 different MAC PRO 4 x 2.66 Ghz cpu's with Ati Radeon X1900-512Mb using V4_m95UB_HD.
From MATROX Web Site.
Mac system compatibility
Support for Mac OS X v10.4 is limited to a specific list of Mac desktop and notebook models. Please refer to the list below to view the available compatibility on both the TripleHead2Go and DualHead2Go based on Mac system model.
Notebook Model DualHead2Go
Maximum resolution TripleHead2Go
Maximum resolution
MacBook 2048x768 (2x 1024x768)1 Not supported
MacBook Pro 2560x1024 (2x 1280x1024) 3840x1024 (3x 1280x1024)2
2400x600 (3x 800x600)3
1 An Apple™ Mini-DVI to VGA adapter is required to connect to the VGA input of the Graphics eXpansion Module
2 The notebook LCD must be closed to achieve this maximum resolution
3 Notebook LCD is active
Desktop Model DualHead2Go
Maximum resolution TripleHead2Go
Maximum resolution
Mac Pro 2560x1024 (2x 1280x1024) 3840x1024 (3x 1280x1024)1
Mac Pro G5 2560x1024 (2x 1280x1024) 3840x1024 (3x 1280x1024)1
Mac mini 2048x768 (2x 1024x768) Not supported
iMac (17") 2048x768(2x 1024x768)2 Not supported
iMac (20") 2560x1024(2x 1280x1024)2 3840x1024 (3x 1280x1024)
iMac (24") 2560x1024(2x1280x1024)2 3840x1024 (3x 1280x1024)
1 With ATI Radeon X1900, the 3840x1024 (3x1280x1024) resolution is available when TripleHead2Go is the only device connected to the graphics card. If another display is connected to one of the outputs of the graphics card in addition to the TripleHead2Go, the maximum resolution supported by TripleHead2Go will drop to 2400x600 (3x800x600).
2 An Apple™ Mini-DVI to VGA adapter is required to connect to the VGA input of the Graphics eXpansion Module.
Roberto Novelli HighEnd System dealer for Italy.
1. there isnt any driver required - whether this works depends on the output resolutions that the graphics card supports. the matrox software isnt a 'driver'.Originally Posted by roberto_novelli
2. the people with problems tried using this with much older computers - dual 2.0Ghz or 2.7Ghz G5 - and it kindof does work - just - but it depends on the graphics card. and the computers arent really up to doing this.
3. the information on matrox site - talks about 'supported' in computer speak - this is equivalent to what has been 'tested' to either work or not. not whether it might actually work.
4. support for specific resolutions on specific computers - is NOT accurate - as these computers can have different graphics cards - which may or may not support these resolutions - or may or may not support these resolutions depending on which OS version is installed. for the Mac Pro - there are 3 graphics cards available.
[QUOTE=roberto_novelli]This is official from MATROX WEB SITE.
You can have 3840x1024 (3 screen 1280x1024) with 1 output active and
1 THTG (triplehead2go) only.
with 2 output active you can have maximum
double for 2400x600 (6 screen 800 x 600)[/QUOTE=roberto_novelli]
Sure , that as been done by Richard since long time ago .
I've just report that now matrox officially support the THTG in their web site .
As Richard say it depends on the graphic card you've got in your system .
Acutally TWO output support full 3x1280x1024 on a NVIDIA GeForce 7300 GT 256MB (DVI single-link/DVI dual-link) Mac pro standard 2.0 gig .
Dual head ( and triple ) work also on old g4 macmini with really low res .
Personally I've tried on a MacBook pro and a Mac Pro 2.0 gig , the first is equiped with a 128 mega ram video , and it does not work that good if LCD main monitor is on , to make it work it have to be off or at very low res .
the senconds did work really good with six output ( impressive ) See picture . ( two layers run two movies 2048x2048 photo jpeg 100% very very smoth )
BTW as Richard say it's not about the computer you are using , it's all about graphic card .
the matrox App it's onyl a placebo ... it's just useful for setting the second monitor from the main one , nothing else .
E
We've done a show early december with a 6 screen wide panorama on two THTG and a MAC PRO.
System: MAC PRO dual 2,66 GHZ processor, raptor content drive, Nvidia 7300 graphics card, Decklink HD extreme input card, two THTG
Content was created for this job with after effects and illustrator. And some stock content was used.
We could ran up to 2 movies simultane before any hickups were noticed. We also provided live video input for PIP camera picture. We also ran audio from the MAC since some movies had audio on them... Additional DL-1's were in place for video effekt all around.
Thanks to the keystone per output we could work around the poles of the building as you can see on the pictures.
Programming was done on a HOG1000 desk.
Fons Hogenes
Improve
Rotterdamseweg 270
2628 AT DELFT
Netherlands
info@improve.nl
Hey Improve,Originally Posted by Improve
I have a show I am doing in March and I was planning on doing the same configuration. Up to now, I have always used only a single TH2G on a Mac Pro but for this show, I will have two 1x6 blended screens and since I will already be using 2 Cats on other screens, I don't want a ton of extra.
I would prefer making this a 4 cat show instead of a 6 cat show. A few questions I would have for you are:
What was the size and aspect ratio for you content creation? I am guessing something like 2650x480 right? I arrive at this based off of 6 screens at 640x480 subtracting the 5 20% overlap zones. Is this right?
Or, perhaps you were at higher rez like 3200x600 (6 - 800x600 minus 20% overlaps zones).
I am planning on doing research on this and I will probably prototype the entire show in a warehouse before going out but since you've already successfully accomplished this, I wanted to start by getting your input.
One very specific question I would ask is how easy was it to manage the edge blend between the two TH2G devices? Did you have spanned content across the two or did you simply treat one as a left running 6 layers and the other as a right running 6 layers? I am preferring the first of the two scenarios but I am worried you are doing the split is that right?
Most of my shows I prototype and I tend to spend more time in R&D than in production so if you would like to collaborate on solutions that work, send me a message.
And Hey Emilano, the same goes for you too haha. And of course Richard, your input is always wonderful.
SourceChildTODD SCRUTCHFIELD
...if it ain't broke...
gimme 5 and then don't act surprised
Originally Posted by SourceChild
NO! Careful ! you can't use content bigger the 2048x2048 that's the maxumim allow by OpenGl .
If you want you can create you own conten 4096 x X then split it in afterFX and play the first 2048 x X in a mix and the other 2048 x X in an other mix .
But remember max size per layer it's 2048 x 2048 .
I was not using blending so I don't know .Originally Posted by SourceChild