Hello Ricard
How can i play a sound file 44.1 stereo on a digidesign mbox i can see in the audio play back my mbox outputs ch1 ch2 but i can't select them the are gray????
Hello Ricard
How can i play a sound file 44.1 stereo on a digidesign mbox i can see in the audio play back my mbox outputs ch1 ch2 but i can't select them the are gray????
Hello.Originally Posted by awouters
Can you send me some information from the console log.
Open the 'console' application - its an apple program, and copy the information i output when samsc opens.
It gives me a very detailed description of what the mBox is.
The problem is that each and every rotten audio interface does something slightly different, and that i actually need to test quite a few to find out what the differences are.
This information will help me.
You are looking for something like:
Code:CA Out --- device count = 1 CA Out---******** Device = 1 Apple Built-in Audio 'bltn' CA Out------- Device format - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32 CA Out--- deviceBufferSize = 4096, nominal Sample Rate 44100 CA Out------- number buffers = 1 CA Out----- buffer 1 has 2 channels CA Out-------- total channel count = 2 CA Out----- device has 1 streamIDs CA Out--------- streamID 0 - 10 - Start Channel 0 CA Out----- device stream supports 3 formats
did you manage to get me any information?
the mbox seems very expensive- thought about buying one to test.
Richard,
On friday, next week, I will be working with an mBox, so I will be able to send you the info if you want.
Philippe
yes please. digidesign does something different with their audio channel assignments.
they didnt use interleaved audio on the digi002 i borrowed.
i dont know the channel layouts.
Richard:
Ok, here is the console log I got opening SAMSC with the Mbox attached:
I'll have the Mbox for a few more days, so if you need something else just tell me. I´m also sending an attachment that shows the multichannel Out with the digidesign mbox grayed.PHP Code:
*********************************************************************************************************
---------------------------------------------------------------------------------------------------------
---------------SAMSC 5.0 OSX_d22 Mar 14 2005 Free:20971520
<CFData 0x4226e0 [0xa01900e0]>{length = 6, capacity = 6, bytes = 0x000d932c96ee}
## Component Manager: attempting to find symbols in a component alias of type (regR/carP/x!bt)
<CFData 0x436fb0 [0xa01900e0]>{length = 6, capacity = 6, bytes = 0x000d932c96ee}
CM -- Device 0 Apple, IAC Driver, IAC Driver, unique id 1809559139
CM -- Entity count 1
CM - dest 0 IAC Bus 1 -882443953
CM - source 0 IAC Bus 1 -1819548799
CM -- Device 1 M-Audio, 1x1, USB MIDI, unique id 1510336981
CM -- Entity count 1
CM - dest 0 Port 1 823367908
CM - source 0 Port 1 674414195
CM -- Device 2 M-Audio, 1x1, USB MIDI, unique id 11351781
CM -- Entity count 1
CM - dest 0 Port 1 1158243405
CM - source 0 Port 1 -828710518
CM -- Device 3 M-Audio, 1x1, USB MIDI, unique id -880418867
CM -- Entity count 1
CM - dest 0 Port 1 -408383998
CM - source 0 Port 1 1515197095
CM -- Device 4 Digidesign, , , unique id 349362245
CM -- Entity count 0
VIDOUT -- FireWire type - 'vout' subtype - 'fire' flags 0 mask 10254
VIDOUT -- opening firewire output 0
VIDOUT -- DVCPRO HD type - 'vout' subtype - 'DVHD' flags 0 mask 10043
VIDOUT -- Error opening blackmagic output -1
CA Out --- device count = 4
CA Out---******** Device = 1 Apple iSight '1394'
CA Out--- deviceBufferSize = 3072, nominal Sample Rate 48000
CA Out------- number buffers = 0
CA Out-------- total channel count = 0
CA Out---******** Device = 2 Apple Built-in Audio 'bltn'
CA Out------- Device format - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out--- deviceBufferSize = 4096, nominal Sample Rate 44100
CA Out------- number buffers = 1
CA Out----- buffer 1 has 2 channels
CA Out-------- total channel count = 2
CA Out----- device has 1 streamIDs
CA Out--------- streamID 0 - 10 - Start Channel 0
CA Out----- device stream supports 6 formats
CA Out------- format 0 - rate = 32000 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out------- format 1 - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out------- format 2 - rate = 48000 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out------- format 3 - rate = 32000 - ID = cac3 - flags = 0000001E - bytes/pkt = 6144 - fr/pkt = 1536 - ch/fr = 2 - byte/fr = 0 - bits/ch = 16
CA Out------- format 4 - rate = 44100 - ID = cac3 - flags = 0000001E - bytes/pkt = 6144 - fr/pkt = 1536 - ch/fr = 2 - byte/fr = 0 - bits/ch = 16
CA Out------- format 5 - rate = 48000 - ID = cac3 - flags = 0000001E - bytes/pkt = 6144 - fr/pkt = 1536 - ch/fr = 2 - byte/fr = 0 - bits/ch = 16
CA Out---******** Device = 3 harman/kardon SoundSticks 'usb '
CA Out------- Device format - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out--- deviceBufferSize = 4096, nominal Sample Rate 44100
CA Out------- number buffers = 1
CA Out----- buffer 1 has 2 channels
CA Out-------- total channel count = 2
CA Out----- device has 1 streamIDs
CA Out--------- streamID 0 - 12 - Start Channel 0
CA Out----- device stream supports 2 formats
CA Out------- format 0 - rate = 0 - ID = lpcm - flags = 0000000B - bytes/pkt = 4 - fr/pkt = 1 - ch/fr = 1 - byte/fr = 4 - bits/ch = 32
CA Out------- format 1 - rate = 0 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out---******** Device = 4 Digidesign Digidesign HW ( MBox ) 'othr'
CA Out------- Device format - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 4 - fr/pkt = 1 - ch/fr = 1 - byte/fr = 4 - bits/ch = 32
CA Out--- deviceBufferSize = 2048, nominal Sample Rate 44100
CA Out------- number buffers = 2
CA Out----- buffer 1 has 1 channels
CA Out----- buffer 2 has 1 channels
CA Out-------- total channel count = 2
CA Out----- device has 2 streamIDs
CA Out--------- streamID 0 - 14 - Start Channel 0
CA Out--------- streamID 1 - 13 - Start Channel 0
CA Out----- device stream supports 2 formats
CA Out------- format 0 - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 4 - fr/pkt = 1 - ch/fr = 1 - byte/fr = 4 - bits/ch = 32
CA Out------- format 1 - rate = 48000 - ID = lpcm - flags = 0000000B - bytes/pkt = 4 - fr/pkt = 1 - ch/fr = 1 - byte/fr = 4 - bits/ch = 32
CA -- OutputStreams 0 - ID 10 channels 2 - Built-in Audio Apple
CA -- OutputStreams 1 - ID 12 channels 2 - SoundSticks harman/kardon
CA -- OutputStreams 2 - ID 14 channels 1 - Digidesign HW ( MBox ) Digidesign
CA -- OutputStreams 3 - ID 13 channels 1 - Digidesign HW ( MBox ) Digidesign
CA -- 4 OutputStreams
CA -- ID 10 MyOutput 0 - channels 2 offset 0 - Built-in Audio Apple
CA -- ID 12 MyOutput 1 - channels 2 offset 0 - SoundSticks harman/kardon
CA -- ID 14 MyOutput xxxxxxx 2 - mono not compatible - channels 1 offset 0 - Digidesign HW ( MBox ) Digidesign
CA -- ID 13 MyOutput xxxxxxx 3 - mono not compatible - channels 1 offset 0 - Digidesign HW ( MBox ) Digidesign
CA Out --- total audio outputs = 4
CA -- MyOutput 0 ( compatible ) - channels 2 name Stream 0 Ch 1~2 Built-in Audio Apple output( 2 channels, offset 0, streamIndex 0, streamDevIndex 0, deviceBufferStreamIndex 0
CA -- MyOutput 1 ( compatible ) - channels 2 name Stream 1 Ch 1~2 SoundSticks harman/kardon output( 2 channels, offset 0, streamIndex 1, streamDevIndex 0, deviceBufferStreamIndex 0
CA -- MyOutput 2 ( Not Compatible ) - channels 1 name Ch 2 - Digidesign HW ( MBox ) Digidesign output( 1 channels, offset 0, streamIndex 0, streamDevIndex 0, deviceBufferStreamIndex 0
CA -- MyOutput 3 ( Not Compatible ) - channels 1 name Ch 3 - Digidesign HW ( MBox ) Digidesign output( 1 channels, offset 0, streamIndex 0, streamDevIndex 1, deviceBufferStreamIndex 0
CA IOProc -- Device 1 Error = 0
CA Device Start -- Device 1 Error = 0
CA IOProc -- Device 2 Error = 0
CA Device Start -- Device 2 Error = 0
Regards
Philippe
thanks.
Thats a lot of help.
digidesign seems to configure their devices as single channel devices, rather than stereo pairs.
As i play stereo pairs at the moment. i have to write more code to support this........
Richard,
I've just installed the last Digidesign CoreAudio driver version 6.7 (previous one previous was 6.5.2) I don't know if this will make some difference, so I'm uploading a new log with 6.7 installed.
PhilippePHP Code:
*********************************************************************************************************
---------------------------------------------------------------------------------------------------------
---------------SAMSC 5.0 OSX_d22 Mar 14 2005 Free:20971520
<CFData 0x4226c0 [0xa01900e0]>{length = 6, capacity = 6, bytes = 0x000d932c96ee}
## Component Manager: attempting to find symbols in a component alias of type (regR/carP/x!bt)
<CFData 0x436fb0 [0xa01900e0]>{length = 6, capacity = 6, bytes = 0x000d932c96ee}
CM -- Device 0 Apple, IAC Driver, IAC Driver, unique id 1809559139
CM -- Entity count 1
CM - dest 0 IAC Bus 1 -882443953
CM - source 0 IAC Bus 1 -1819548799
CM -- Device 1 M-Audio, 1x1, USB MIDI, unique id 1510336981
CM -- Entity count 1
CM - dest 0 Port 1 823367908
CM - source 0 Port 1 674414195
CM -- Device 2 M-Audio, 1x1, USB MIDI, unique id 11351781
CM -- Entity count 1
CM - dest 0 Port 1 1158243405
CM - source 0 Port 1 -828710518
CM -- Device 3 M-Audio, 1x1, USB MIDI, unique id -880418867
CM -- Entity count 1
CM - dest 0 Port 1 -408383998
CM - source 0 Port 1 1515197095
CM -- Device 4 Digidesign, , , unique id 349362245
CM -- Entity count 0
VIDOUT -- FireWire type - 'vout' subtype - 'fire' flags 0 mask 10254
VIDOUT -- opening firewire output 0
VIDOUT -- DVCPRO HD type - 'vout' subtype - 'DVHD' flags 0 mask 10043
VIDOUT -- Error opening blackmagic output -1
CA Out --- device count = 4
CA Out---******** Device = 1 Apple iSight '1394'
CA Out--- deviceBufferSize = 3072, nominal Sample Rate 48000
CA Out------- number buffers = 0
CA Out-------- total channel count = 0
CA Out---******** Device = 2 Apple Built-in Audio 'bltn'
CA Out------- Device format - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out--- deviceBufferSize = 4096, nominal Sample Rate 44100
CA Out------- number buffers = 1
CA Out----- buffer 1 has 2 channels
CA Out-------- total channel count = 2
CA Out----- device has 1 streamIDs
CA Out--------- streamID 0 - 10 - Start Channel 0
CA Out----- device stream supports 6 formats
CA Out------- format 0 - rate = 32000 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out------- format 1 - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out------- format 2 - rate = 48000 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out------- format 3 - rate = 32000 - ID = cac3 - flags = 0000001E - bytes/pkt = 6144 - fr/pkt = 1536 - ch/fr = 2 - byte/fr = 0 - bits/ch = 16
CA Out------- format 4 - rate = 44100 - ID = cac3 - flags = 0000001E - bytes/pkt = 6144 - fr/pkt = 1536 - ch/fr = 2 - byte/fr = 0 - bits/ch = 16
CA Out------- format 5 - rate = 48000 - ID = cac3 - flags = 0000001E - bytes/pkt = 6144 - fr/pkt = 1536 - ch/fr = 2 - byte/fr = 0 - bits/ch = 16
CA Out---******** Device = 3 harman/kardon SoundSticks 'usb '
CA Out------- Device format - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out--- deviceBufferSize = 4096, nominal Sample Rate 44100
CA Out------- number buffers = 1
CA Out----- buffer 1 has 2 channels
CA Out-------- total channel count = 2
CA Out----- device has 1 streamIDs
CA Out--------- streamID 0 - 12 - Start Channel 0
CA Out----- device stream supports 2 formats
CA Out------- format 0 - rate = 0 - ID = lpcm - flags = 0000000B - bytes/pkt = 4 - fr/pkt = 1 - ch/fr = 1 - byte/fr = 4 - bits/ch = 32
CA Out------- format 1 - rate = 0 - ID = lpcm - flags = 0000000B - bytes/pkt = 8 - fr/pkt = 1 - ch/fr = 2 - byte/fr = 8 - bits/ch = 32
CA Out---******** Device = 4 Digidesign Digidesign HW ( MBox ) 'othr'
CA Out------- Device format - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 4 - fr/pkt = 1 - ch/fr = 1 - byte/fr = 4 - bits/ch = 32
CA Out--- deviceBufferSize = 4096, nominal Sample Rate 44100
CA Out------- number buffers = 2
CA Out----- buffer 1 has 1 channels
CA Out----- buffer 2 has 1 channels
CA Out-------- total channel count = 2
CA Out----- device has 2 streamIDs
CA Out--------- streamID 0 - 14 - Start Channel 0
CA Out--------- streamID 1 - 13 - Start Channel 0
CA Out----- device stream supports 2 formats
CA Out------- format 0 - rate = 44100 - ID = lpcm - flags = 0000000B - bytes/pkt = 4 - fr/pkt = 1 - ch/fr = 1 - byte/fr = 4 - bits/ch = 32
CA Out------- format 1 - rate = 48000 - ID = lpcm - flags = 0000000B - bytes/pkt = 4 - fr/pkt = 1 - ch/fr = 1 - byte/fr = 4 - bits/ch = 32
CA -- OutputStreams 0 - ID 10 channels 2 - Built-in Audio Apple
CA -- OutputStreams 1 - ID 12 channels 2 - SoundSticks harman/kardon
CA -- OutputStreams 2 - ID 14 channels 1 - Digidesign HW ( MBox ) Digidesign
CA -- OutputStreams 3 - ID 13 channels 1 - Digidesign HW ( MBox ) Digidesign
CA -- 4 OutputStreams
CA -- ID 10 MyOutput 0 - channels 2 offset 0 - Built-in Audio Apple
CA -- ID 12 MyOutput 1 - channels 2 offset 0 - SoundSticks harman/kardon
CA -- ID 14 MyOutput xxxxxxx 2 - mono not compatible - channels 1 offset 0 - Digidesign HW ( MBox ) Digidesign
CA -- ID 13 MyOutput xxxxxxx 3 - mono not compatible - channels 1 offset 0 - Digidesign HW ( MBox ) Digidesign
CA Out --- total audio outputs = 4
CA -- MyOutput 0 ( compatible ) - channels 2 name Stream 0 Ch 1~2 Built-in Audio Apple output( 2 channels, offset 0, streamIndex 0, streamDevIndex 0, deviceBufferStreamIndex 0
CA -- MyOutput 1 ( compatible ) - channels 2 name Stream 1 Ch 1~2 SoundSticks harman/kardon output( 2 channels, offset 0, streamIndex 1, streamDevIndex 0, deviceBufferStreamIndex 0
CA -- MyOutput 2 ( Not Compatible ) - channels 1 name Ch 2 - Digidesign HW ( MBox ) Digidesign output( 1 channels, offset 0, streamIndex 0, streamDevIndex 0, deviceBufferStreamIndex 0
CA -- MyOutput 3 ( Not Compatible ) - channels 1 name Ch 3 - Digidesign HW ( MBox ) Digidesign output( 1 channels, offset 0, streamIndex 0, streamDevIndex 1, deviceBufferStreamIndex 0
CA IOProc -- Device 1 Error = 0
CA Device Start -- Device 1 Error = 0
CA IOProc -- Device 2 Error = 0
CA Device Start -- Device 2 Error = 0
its the same.
they split the stereo output into two single channels - as far as the device driver is concerned - when i get time - ill see if i can make this work.
Your harman sound sticks work?
it looks like they should?