Hi, Can you add (or modify custom serial module) to allow send ASCI commands to switchers etc.
Hi, Can you add (or modify custom serial module) to allow send ASCI commands to switchers etc.
write the asci commands in " " quotes
Hex commands go in [] square brackets
Simon Pugsley
SNP Productions Ltd. (UK)
Lighting & Video Control Solutions
Catalyst|Sales|Hire|Training|Support
Catalyst Dealer UK Europe & Worldwide...
Office: +44 (0)1908 410129
Mobile: +44 (0)7958 390034
simon@snp-productions.co.uk
www.snp-productions.co.uk
But how to send it via LAN network to IPaddresort? I want to send ASCI comands to Analogway ORC-50 via TCP/IP or UDP protocol.
{EDITED TO ADD MORE DETAILS...}
Create a TCPIP port in serial settings:
You then have to restart catalyst for the TCPIP ports to appear
Then insert the IP address and port for the device and choose UPD or TCP
(example above shows 4 devices)
Select the TCPIP for each serial control device :
Then write your command:
(This is a command written in HEXfor a Kramer matrix to switch 4 inputs to 4 ouputs)
Each HEX command is in [square brackets]
(This is a command written in TEXT and HEX for a Kramer matrix to switch 4 inputs to 4 ouputs)
Each TEXT command is in "QUOTES" and the carriage return for the command is in HEX [0d]
Let me know if you need more info -
PLEASE NOTE - THIS IS AN EXAMPLE - NOT THE ACTUAL SETTING YOU WILL NEED...
(unfortunately I don't know the commands for the matrix you mention - do check the manufacturers manuals for details...)
S
Last edited by Mr_P; 03-07-2011 at 06:33 PM.
Simon Pugsley
SNP Productions Ltd. (UK)
Lighting & Video Control Solutions
Catalyst|Sales|Hire|Training|Support
Catalyst Dealer UK Europe & Worldwide...
Office: +44 (0)1908 410129
Mobile: +44 (0)7958 390034
simon@snp-productions.co.uk
www.snp-productions.co.uk
Mainly commands to load preprogramed presets in ORC-50, but I will check taht tomorrow and I think I can do that.
just had a look at the website:
see serial commands PDF for details:
http://www.analogway.com/downloads/u...0_Protocol.pdf
Example:
To Load the Preset Memory #10
command to insert in to catalyst would be:
"10PL"
S
Simon Pugsley
SNP Productions Ltd. (UK)
Lighting & Video Control Solutions
Catalyst|Sales|Hire|Training|Support
Catalyst Dealer UK Europe & Worldwide...
Office: +44 (0)1908 410129
Mobile: +44 (0)7958 390034
simon@snp-productions.co.uk
www.snp-productions.co.uk