Lamp on off and shutter open/close (fast) would be the most useful
Here are codes for 4 x Projector ID's for both Panasonic and Barco:
BARCO CODES:
Shutter OPEN 1
[FE0122420065FF]
Shutter OPEN 2
[FE0222420066FF]
Shutter OPEN 3
[FE0322420067FF]
Shutter OPEN 4
[FE0422420068FF]
Shutter CLOSE 1
[FE0123420066FF]
Shutter CLOSE 2
[FE0223420067FF]
Shutter CLOSE 3
[FE0323420068FF]
Shutter CLOSE 4
[FE0423420069FF]
Note - there is no seperate command for Lamp ON and Lamp
OFF - so the only way to strike/douse lamp is to emulate the
IR remote keypress for 'standby'. Therfore this code will both
strike AND douse the lamp - depending upon the current state
of the lamp. Send code once, it will strike. Send it again later,
it will douse.
IR Standby 1
[FE01300E3FFF]
IR Standby 2
[FE02300E40FF]
IR Standby 3
[FE03300E41FF]
IR Standby 4
[FE04300E42FF]
PANASONIC Codes:
Lamp ON proj 1
[02414430313B504F4E03]
Lamp ON proj 2
[02414430323B504F4E03]
Lamp ON proj 3
[02414430333B504F4E03]
Lamp ON proj 4
[02414430343B504F4E03]
Lamp OFF proj 1
[02414430313B504F4603]
Lamp OFF proj 2
[02414430323B504F4603]
Lamp OFF proj 3
[02414430333B504F4603]
Lamp OFF proj 4
[02414430343B504F4603]
Shutter Open proj 1
[02414430313B4F53483A3003]
Shutter Open proj 2
[02414430323B4F53483A3003]
Shutter Open proj 3
[02414430333B4F53483A3003]
Shutter Open proj 4
[02414430343B4F53483A3003]
Shutter Close proj 1
[02414430313B4F53483A3103]
Shutter Close proj 2
[02414430323B4F53483A3103]
Shutter Close proj 3
[02414430333B4F53483A3103]
Shutter Close proj 4
[02414430343B4F53483A3103]