Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: cat v4.06 m97 - beta 5

  1. Hi Richard thanks for your answer.
    HD is not priority at moment but i think is marriable perfectly
    with triplehead2go and multiple output on CATV4.
    In my office i have many HD systems like VIDEOCAMERAS and
    SPECIAL HARDDRIVER to storage HD FILM/VIDEO and IMAGES,
    is not impossible to test HD for me,is only time problem
    We haved a show in TORINO last SATURDAY and we use 1,2 Terabyte
    movies and images high resolution in uncompressed files(choice of customer).
    We solve using more hard driver to play movies simultanuosly,for this
    i'm organizzing my MAC PRO CatV4 DEMO unit with A MULTIPLE RAID
    HARD DRIVE internal/external system(i'm testing both).

    At moment my priority is to have a special configuration to have
    8 videoprojector in soft hedge and keystoned.
    the image must to be one using 8 orizzontal videoprojector.

    You will reiceved details from HES rappresentant RUDIGER,was with me during
    my DEMO to the customer.

    I know we can use 2048x2048 max image size (OPENGL).

    My idea is:

    Use 2 MAC PRO CatV4 to have 4 output.
    Use 4 for dualhead2go to became 8 output, 8 for 800x600 resolution .
    Use 4 mixes each CatV4 for a total of 8 mixes (1 mixes each output).
    Use X offset each mixes.
    Use blending right/left where is necessary.
    Use Keystone where is necessary.

    I think is possible to use 4 image files of 1600x600,for a total screen
    of 6400 x 600 image.
    in order to use movie files i will put the files in 4 different hard driver and
    i will use Sink ID to sincronize both files on 2 MAC.

    How do you think about this configuration????
    Please let me know if we can to do in different mode.
    thanks


    Roberto Novelli HighEndSystem dealer for ITALY

    Product Manager & Technical Support
    roberto_novelli@ianiro.com
    IANIRO ALDO srl.

    helpdesk : ianiro@ianiro.com
    http://www.ianiro.com
    Sede principale/Head Office : Via Ragusa, 5
    Logistica/Logistics : Via Ragusa, 3
    00040 Pavona (Roma)- ITALY
    +39 06 9310198 ra tel
    +39 06 93162162 fax

  2. #12
    i used a configuration very similar from what you described, but I used 6 projectors in a row.. I did use 2 triple Heads and 2 Catalysts to do it.

    So 1 Catalyst and 1 Triple Head gows to 3 projectors, and the same on the second CAT. each one with 2400 x 800. SYNC IDs on the Layers and all went thru OK.

    The total of the Image was 4800 x 800, the only issue is you need to make a movie on that configuration.

    We toth was too Big, to play on Catalyst, so the guys made a Video of 1600 x 800, and the image inside the Video was squeezed, when I placed in Catalyst, using Aspect Ratio, I did Stretch the image to the above format.

    i know is not the best, but work out OK.

    Also we used some content making like 3/ 4 layers each time, cloning some etc...

    Gian
    Gian
    Ibeam SP
    SP, Brasil

  3. Yes is very similar,but i need to know if X Offset can allocate
    8 orizzontal mixes and specially if i will not problem to blending
    both MAC PRO.
    At moment we are to selled all CATv4 and i'm waiting 2 new cat server
    from HES.For this i'm impossibilitate to test this configuration.
    I hope reiceve my catv4 servers very soon.

    Roberto Novelli HighEndSystem dealer for ITALY

    Product Manager & Technical Support
    roberto_novelli@ianiro.com
    IANIRO ALDO srl.

    helpdesk : ianiro@ianiro.com
    http://www.ianiro.com
    Sede principale/Head Office : Via Ragusa, 5
    Logistica/Logistics : Via Ragusa, 3
    00040 Pavona (Roma)- ITALY
    +39 06 9310198 ra tel
    +39 06 93162162 fax

  4. #14
    Join Date
    Feb 2004
    Location
    Melbourne, Australia
    Posts
    163
    You can allocate an offset up to a factor of 10 so you should be able to do 2 servers x 4 outputs as one image easily. One server will be minus offsets to the left and the other positive offsets to the right. That way the centre of the image will be located at the join between Projectors 4 & 5.

    The main thing will be running a network so you can sync one server to the other.

    Cheers

    Toby

  5. #15
    The X OffSet is not a problem like tharding said,....

    You shure just goes up to 10 ? You saw is a CUSTOM option now right ? even with that just goes up to 10 ? I always used last than that so just curious.

    SYNC is very important... Also the Content orgnize etc...

    Just remember we are talking on the latest versions, like m97 what we are discussing here. The Officciel High End releases do not do that Offsets.

    Regarding BLENDING NO PROBLEM and easy to set up and configure. On each submix you just set up a BLEND and will wor withy no Problems X - Y etc...

    Regards

    Gian
    Gian
    Ibeam SP
    SP, Brasil

  6. Talking

    Thanks at all,i know very well this release ihaved worked fine using
    2 for Triplehead2go and 6 mixes output on the same MAC PRO.
    But is the first time i mast to work with 8 projector/mixes in one
    orizzontal line.
    This work is based in 8 big panel for 270° around the television studio.
    I'm waiting the test files and when is possible i will attach some photos
    of the test.
    bye

    Roberto Novelli HighEndSystem dealer for ITALY

    Product Manager & Technical Support
    roberto_novelli@ianiro.com
    IANIRO ALDO srl.

    helpdesk : ianiro@ianiro.com
    http://www.ianiro.com
    Sede principale/Head Office : Via Ragusa, 5
    Logistica/Logistics : Via Ragusa, 3
    00040 Pavona (Roma)- ITALY
    +39 06 9310198 ra tel
    +39 06 93162162 fax

  7. #17
    Quote Originally Posted by Gian
    Just remember we are talking on the latest versions, like m97 what we are discussing here. The Officciel High End releases do not do that Offsets.
    Wait a minute ! do you mean that m97 it's not supported by HES ?

    what's the point to show it in a demo if then there is no support for it ?

    I can't really understand .

    cheers

    E

  8. #18
    At the downloads page on high End Systems, you will found... and I belive that is theier official release. We all are using BETAs, I don't know about HES support etc.. since we here are mostly autoditatas (self learning) people. I like test things, so I am very OK with that.

    http://www.highend.com/products/digi...aldownload.asp

    Last updated Nov. 2, 2006 with m50 build:
    Catalyst v4.05 m50UB_HD Software [zip] 6MB
    Note: Catalyst v4.05 m50UB_HD is a Universal Binary and requires a Universal Binary dongle driver. Also, it is not recommended for OS X before 10.4.6.
    Gian
    Ibeam SP
    SP, Brasil

  9. A little question about this release.
    When i use keystone,i can move easily corner right top and bottom.
    the corner left top i use key "shift" on keyboard to move it.
    But i have difficulty to move corner left bottom because there is
    the menu of HUB.
    There is other key on keyboard to ease the movement for this corner??
    Every suggest is wellcome.

    @Richard
    My dream is use mixes keystone and blending from consolle....
    will see....i'm sure Richard is forward
    thanks

  10. #20
    Quote Originally Posted by roberto_novelli
    A little question about this release.
    When i use keystone,i can move easily corner right top and bottom.
    the corner left top i use key "shift" on keyboard to move it.
    But i have difficulty to move corner left bottom because there is
    the menu of HUB.
    There is other key on keyboard to ease the movement for this corner??
    Every suggest is wellcome.
    Go in Mix Options ....

    Cheers

    E
    Attached Images Attached Images
    Last edited by emilianomorgia; 01-03-2007 at 12:21 AM.

Similar Threads

  1. Cat V4.06 m95 App quit moving mix1 in pixelmixes
    By RuedigerH in forum Bug reports
    Replies: 7
    Last Post: 20-12-2006, 08:03 PM
  2. Hog III profile for Cat 4.06 Beta
    By ILCstaff in forum Catalyst Technical support
    Replies: 4
    Last Post: 08-12-2006, 04:34 PM
  3. cat v4.06 m67 beta 4
    By samsc in forum Catalyst Downloads
    Replies: 50
    Last Post: 27-11-2006, 03:55 PM
  4. Cat V4 Fixture
    By Mauricio Caicedo in forum Catalyst Feature requests
    Replies: 1
    Last Post: 01-11-2006, 05:24 PM
  5. cat v4.06 m67 beta 4 bug reports sync don't loop
    By emilianomorgia in forum Catalyst Downloads
    Replies: 8
    Last Post: 11-10-2006, 04:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •