Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Rs232

  1. #1
    Join Date
    Oct 2004
    Location
    UK - Milton Keynes
    Posts
    807

    Lightbulb Rs232

    Been asked for these lots too:

    RS232 Codes for various equipment:
    BARCO projectors - shutter, power commands
    Panasonic projectors - shutter, power commands

    !UPDATED!
    HEX-DEC-BIN-ASCII conversion cheat sheet
    MIDI notes cheat Sheet

    Kramer - matrix commands
    Procom - matrix commands
    Leitch - matrix commands

    enjoy

    Simon
    Attached Files Attached Files
    Last edited by Mr_P; 20-05-2006 at 01:49 AM.

  2. #2
    thanks simon.

    this is very useful

  3. #3
    i added your panasonic codes the the latest build.
    Any others you would like?

  4. #4
    Join Date
    Oct 2004
    Location
    UK - Milton Keynes
    Posts
    807
    Actually - Barco Shutter open and close (fast) would be the most useful - say for 2 x projector ID's (1&2).

    Im trying to find where I wrote all the other matrix codes as mentioned above - when I find them I'll post them - but there are far too many combinations to include in the Catalyst List - maybe just 2 x examples of each? - check back friday!

    S

  5. #5
    please put anything here you want included.
    if you are quick it will make it in-
    i dont have time to check this - so make sure you give me exactly what you want/need

  6. #6
    Barco shutter open and close is a common one I get asked for.

    Hugh

  7. #7
    Quote Originally Posted by Spam Butterfly
    Barco shutter open and close is a common one I get asked for.

    Hugh
    you have the command string?

  8. #8
    Join Date
    Oct 2004
    Location
    UK - Milton Keynes
    Posts
    807
    Lamp on off and shutter open/close (fast) would be the most useful

    Here are codes for 4 x Projector ID's for both Panasonic and Barco:

    BARCO CODES:
    Shutter OPEN 1
    [FE0122420065FF]
    Shutter OPEN 2
    [FE0222420066FF]
    Shutter OPEN 3
    [FE0322420067FF]
    Shutter OPEN 4
    [FE0422420068FF]

    Shutter CLOSE 1
    [FE0123420066FF]
    Shutter CLOSE 2
    [FE0223420067FF]
    Shutter CLOSE 3
    [FE0323420068FF]
    Shutter CLOSE 4
    [FE0423420069FF]

    Note - there is no seperate command for Lamp ON and Lamp
    OFF - so the only way to strike/douse lamp is to emulate the
    IR remote keypress for 'standby'. Therfore this code will both
    strike AND douse the lamp - depending upon the current state
    of the lamp. Send code once, it will strike. Send it again later,
    it will douse.

    IR Standby 1
    [FE01300E3FFF]
    IR Standby 2
    [FE02300E40FF]
    IR Standby 3
    [FE03300E41FF]
    IR Standby 4
    [FE04300E42FF]


    PANASONIC Codes:
    Lamp ON proj 1
    [02414430313B504F4E03]
    Lamp ON proj 2
    [02414430323B504F4E03]
    Lamp ON proj 3
    [02414430333B504F4E03]
    Lamp ON proj 4
    [02414430343B504F4E03]

    Lamp OFF proj 1
    [02414430313B504F4603]
    Lamp OFF proj 2
    [02414430323B504F4603]
    Lamp OFF proj 3
    [02414430333B504F4603]
    Lamp OFF proj 4
    [02414430343B504F4603]

    Shutter Open proj 1
    [02414430313B4F53483A3003]
    Shutter Open proj 2
    [02414430323B4F53483A3003]
    Shutter Open proj 3
    [02414430333B4F53483A3003]
    Shutter Open proj 4
    [02414430343B4F53483A3003]

    Shutter Close proj 1
    [02414430313B4F53483A3103]
    Shutter Close proj 2
    [02414430323B4F53483A3103]
    Shutter Close proj 3
    [02414430333B4F53483A3103]
    Shutter Close proj 4
    [02414430343B4F53483A3103]
    Last edited by Mr_P; 21-05-2006 at 01:20 PM.

  9. #9
    i have actually written a custom barco control panel in the past - calculates checksums - does changing of source, and gamma, shutters.
    it does a few simple things. its not in the software yet -

    if you want to test it i can make it available to you?

    ---

    what projector type or range is the panasonic?
    i need somekind of extra label.

  10. #10
    Join Date
    Oct 2004
    Location
    UK - Milton Keynes
    Posts
    807
    Yes - would like to check out your app. My excel spreadsheet does the same - with formulas to add up and calculate the checksum for Barco Codes.

    The Barco codes work on the SLM range - I think they are the same for the RLM and XLM, not sure about the new FLM though

    Panasonic codes were written for the PT-D7700U-K
    According to the documents, it should also work with: PT-D7700U PT-DW7000U PT-DW7700E PT-D7700EK as they share the same software etc.
    The codes may also work with the other projectors in the 'large venue' range, but I cant confirm that.

Similar Threads

  1. ethernet to serial boxes
    By samsc in forum Catalyst Technology questions
    Replies: 10
    Last Post: 26-04-2007, 09:54 AM
  2. Playing a DVD?
    By Urb in forum Catalyst Technology questions
    Replies: 24
    Last Post: 03-02-2006, 10:10 PM
  3. kramer ethernet to rs232 rs485 convertor
    By samsc in forum Technology questions
    Replies: 0
    Last Post: 01-08-2005, 04:52 PM
  4. jvc video deck with rs232 control
    By samsc in forum Technology questions
    Replies: 0
    Last Post: 31-05-2005, 01:55 PM
  5. SAMSC control of Christie Roadie 25k projector.
    By meetmeatthemonkeybars in forum Technology questions
    Replies: 1
    Last Post: 29-04-2005, 03:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •