peperoni usb dongles

[kmclights]

From the peperoni makers...

Dear Kevin
The steady blue light means - you are right - that DMX is received. In addition it means that there are not USB transactions going on. The later seems to be the reason for your problems: the catalyst software is not handling the Rodin2 anymore.
As long as the software is handling the interface the blue led is flashing with approx 2Hz. If there is no DMX signal present the led will flash red with approx 2Hz and keep signalling usb transactions in blue.
Hopefully that helps.

Kind regards
Jan Menzel

...For all you who know more about Catalyst than I do...If this is true, why would Catalyst stop handling the peperoni adapter all of it's own accord?

Kevin

[samsc]

dont know - not tested recently for over a year - but i think that peperoni changed the way they did the usb.

[emilianomorgia]

Catalyst does handling the peperoni adapter.

[samsc]

Catalyst does handling the peperoni adapter.

i think they may have changed something in the hardware - but i havent had a chance to test for a long time

[Mike Redmer]

i have actual running a peperoni dmx->usb interface (it's two month old) and work's without any problems on intel mini mac pro, osx 10.4.9 and catalyst m119.

plug, patch in catalyst and play

[samsc]

some people are having problems. i think there are different versions.

[Mike Redmer]

possible is also the dmx protocol with it different versions. many dmx receiver have problems with revision a, will stop working and have to restart.

it run's with hog2, osx 10.4.9 and catalyst build 119