SMPTE Reader

[samsc]

Same Here !

Motu Time Piece XT . It say Device off line

if a midi device says 'offline' you need to check the audio midi setup application.

and whatever software the midi device has to control its ports.

---

audio midi setup app screen capture shown below - showing both active and 'offline' devices.
if in doubt delete everything, and start from scratch with an empty setup.

[emilianomorgia]

if a midi device says 'offline' you need to check the audio midi setup application.

and whatever software the midi device has to control its ports.

---

audio midi setup app screen capture shown below - showing both active and 'offline' devices.
if in doubt delete everything, and start from scratch with an empty setup.

Ok this couse me a lot of problem , actually the PixMad say device offline because the device s driver was corrupted . At fisrt time i take a while to understand that because the device was showed in the midi set up .

Btw after restoring the driver , other apps did read the MTC but not PIXMAD .

[emilianomorgia]

i did resolve the problem . I had to lunch the Motu in the garbage !!!

I m now using a old MidiMan Syncman that convert SMPTE to MTC then the MTC goes in a Saffire LE so now Pixel Mad recognize the TC .

I strongly raccomand to do NOT use MOTU XT or AV . those things are @+"><£ ... you know what I mean .

Also I think if richard could make a SMPTE READER module into the Cat / PM / SaMsc control pannel , where those use the LINE IN to get SMPTE things will be more easy .

thanks