Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: SDI Interfaces - Are they all Expensive

  1. SDI Interfaces - Are they all Expensive

    Hi All

    Does anyone know of an SDI interface I could use with Catalyst that doesn't cost a small fortune. I know they are not cheap, but.........

    Nev.

  2. #2
    ----

    Added mar05:
    for newcomers to this thread the only one we can find at mar05 is the gefen bi-directional HD-SDI to DVI convertor

    http://www.gefen.com/kvm/product.jsp?prod_id=2566
    $2000

    ---

    this company claimed to have a device that converts the dvi output to sdi.

    http://chaldee1.gotadsl.co.uk/~richa...ghlight=dvi2tv
    but this company never delivered.

  3. #3

    Cheap SDI Out

    Hi

    As long as you can use just one of the outputs you can do as we did:
    Use the S-Video (Y/C) output on the GraphicsCard.

    S-Video - Adaptor MiniDin to Coax - S-Video to SDI Interface AJA D5D.

    (You might have to start the G5 with a 75Ohm conected to the output, otherwise the G5 doesnt start the Y/C out.)

    Works well for simpler purposes.

    All the best

    Abbe Westerlundh

  4. #4
    I use the 6590 from Cobalt digital to do the exact same thing.

    http://www.cobaltdigital.com/products.htm

  5. #5
    Apple actually makes a dvi to s-video convertor that works with g5 dvi outputs.

    I bought one at frys in las vegas.

    they dont seem to have stock at the apple store.

    I dont know how it works.

    It called the

    Apple DVI to Video Adapter

    Searching the apple store for this works.

    Its in the apple store on the cable accessory page about halfway down,
    Cant get a direct link

  6. #6
    All those I have looked at recently are around the $1000 mark. I'm planning to bring back a few from NAB this April.

  7. #7
    $1000 for sdi is pretty reasonable,

    which ones do you use?

  8. #8

  9. #9
    Quote Originally Posted by rosswill
    does this work with rgbhv, how do you connect it up with a vga source?

    Quote Originally Posted by rosswill
    this is only component?

    do any of these cheap ones convert dvi or vga directly to sdi?

    I know the expensive scan converters do this.

  10. #10
    I dont know but I doubt it.

    This box does dvi to sdi and sdi to dvi but its $2,000 http://www.gefen.com/kvm/product.jsp?prod_id=2566

    I presumed that the signal would be scan converted. I can't think of many sdi input devices which would take Catalyst RGBHV.

    Extron make an sdi scanconverter all in one.
    http://www.extron.com/product/produc...700&subtype=39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •