Rob is showing that use can use the etherlynx box to do an http merge between pixelmad output and lighting console output.
So you can drive the led or other fixtures from pixelmad and a lighting console at the same time.
Developer
Rob is showing that use can use the etherlynx box to do an http merge between pixelmad output and lighting console output.
So you can drive the led or other fixtures from pixelmad and a lighting console at the same time.
Member
Yes,
The application need not be restricted to moving lights.
It was useful on this gig to control the colours of the Ayrton's LEDs both from PixelMad and direct from the desk by channel.
This could be useful in may gigs where you want this flexibility with say Pixellines or chroma-banks etc....
Developer
where you want to run the pixelines from the desk and pixelmad at the same time...Originally Posted by RobF
Member
Nice to hear that you're using the combination of desk control and pixel control for the units. that's exactly why we have the oportunity to set our Node's outputs to merge 2 different ArtNet sources (PixelMad and desk) in either HTP or LTP mode. In LTP mode you can even take control with the desk to flash different colours when you have a still image. With LTP you don't need to bring the PixelMad colours to zero to do this.
Have a look at our Node's app note it shows a similar setup (maybe not mentioning the right pixel software.
Ethernet - DMX8 Application note
Posting Permissions
Reply With Quote