Thats because Exact Map is a v5 only function of Catalyst. It was only in v4 for testing purposes or in custom builds.
Nev.
Thats because Exact Map is a v5 only function of Catalyst. It was only in v4 for testing purposes or in custom builds.
Nev.
Last edited by NevBull; 11-09-2014 at 12:17 PM.
Nev Bull
Pixels Plus Limited
Digital Video Services
Catalyst Software - Upgrades - Server Hardware - Accessories - Training - Support
t: +44 (0)1494 858151
skype: nevillebull
e: nev@pixelsplus.co.uk
w: www.pixelsplus.co.uk
Hello,
It seems you made a little change on how the timecode offset is read from the Out-Frame field.
On Catalyst m466 (and v5, but not in m364) :
using the play-mode 25~28 (Sync to SMPTE),
if the In-frame is =0
and the Out-frame is >0
the layer will output black as soon as timecode rolls.
If the In-frame is >0, the Out-frame works (as a negative offset).
The out-frame can be higher than the in-frame, as soon as the in-frame ≠0.
The In-frame works fine with Out-frame=0.
Is there a reason for that ?
In m364, out-frame worked well with in-frame=0.
Last edited by DuckEater; 10-03-2015 at 06:44 PM. Reason: tested also in V5
are you saying what you see when:
inframe=0 and outframe > 0
is different between these version?
what you say worked well in m364?
thats not what i see -
please supply more details of timecode range you using
and smpte options - looping? screen capture of smpte settings would be useful
you have black frames at start and end of movie?
-
there are a lot of changes between m364 - and m466 - but nothing that stops it working-
Sorry I was long to send the screens, but here they are !
I was using 25fps @44.1kHz timecode. It worked well in m364 and has an issue on m464
(same show, same computer, same audio card, same timecode source, etc.)
inframe=0 and outframe > 0 : media is not played on Catalyst m464
Attachment 849
inframe > 0 and outframe > 0 : media is played well on Catalyst m464
Attachment 850