Results 1 to 2 of 2

Thread: Kramer 6x6 DVI ethernet comuication

  1. #1
    Join Date
    Mar 2010
    Location
    Newcastle 10% ,London 70%, On the road 20%
    Posts
    41

    Kramer 6x6 DVI ethernet comuication

    Has anyone successfully communicated with the Kramer 6x6 DVI to switch presets using the custom serial sends? I left work this evening thinking this will probably be harder than it should be, so any pointers in the vague correct direction would be greatly appreciated.

    Cheers

    Andy

  2. #2
    Join Date
    Mar 2010
    Location
    Newcastle 10% ,London 70%, On the road 20%
    Posts
    41
    UPDATE:
    That was a little easier than anticipated, the hardest part was finding the correct software to set the ethernet:

    1: Get the software here: http://www.kramerelectronics.com/sup...ad.asp?f=30115

    2: PC only, connect to your device via a ethernet hub/switch

    3: Set up a custom serial device with TCP Output, the ipi of the unit to communicate with and the default port is generally 5000 if you haven't changed it.

    3: The stings to send are the same as the 232 commands, e.g as follows:

    Recall Preset 1
    [04818081]

    Recall Preset 2
    [04828081]

    Recall Preset 3
    [04838081]

    And on and on, for induvidual patching in and out see the Kramer documentation.
    http://www.kramerelectronics.com/dow...00_rev0_51.pdf
    Page 10 is handy.

    Cheers

    Andy

Similar Threads

  1. Datapath x4 - 4 output dvi splitter
    By samsc in forum Catalyst Technology questions
    Replies: 6
    Last Post: 17-11-2011, 08:58 PM
  2. DVI exstenders
    By litemover in forum Catalyst Technology questions
    Replies: 15
    Last Post: 14-12-2007, 05:35 PM
  3. A DVI to SDI conversion box from Gefen
    By samsc in forum Catalyst Technology questions
    Replies: 6
    Last Post: 05-07-2007, 11:19 AM
  4. Activate DVI Output on a Radeon X800 - how does that work?
    By bright in forum Catalyst Technology questions
    Replies: 1
    Last Post: 17-01-2006, 06:50 PM
  5. kramer ethernet to rs232 rs485 convertor
    By samsc in forum Technology questions
    Replies: 0
    Last Post: 01-08-2005, 04:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •