Layers across multiple mixes

[Mr_P]

The simplest way was to have something running in mix 3 across all 3 screens and then just bring up mix 6 over it.
The problem though is when I would bring up mix 6 to something less than full intensity I would see a blend between the background Mix 3 and Mix 6.

That would be the expected result

To try and fix this I put a layer of black at full in mix 6 "behind" the IMAG and "on top" of Mix 3. I would still see through mix 6 and see a blend of Mix 3 and Mix 6. My IMAG would get slightly "brighter" when this layer of black was added but it would not act as an opaque layer as I hoped. I even tried making it a mask and that didn't seem to work either.
It would only work if put a scaled layer of black on Mix 3 on top of the video content and "behind" mix 6.

I thought that Blend Glitch C should fix this - but it doesn't...?
So using Blend Glitch A (or B)

Try using custom colour effect: 'HSB Mix' on the IMAG layer in Mix 6 and reduce the brightness controller as necessary - it seems to work without making the image transparent...

S