Multiple Outputs

[Mr_P]

What do you need to do that you cant do over 2 servers?

Or use peripheral equipment to scale into a larger pallet to create smaller outputs.

Scan Converters or Old style screen controllers can do this:

http://www.iiview.com/index.php/vide...ll-controllers

Same idea as TH2G - but more ouptut at lower resolution...


S

[Paul Breen]

Thanks for all the info. What I'm doing is a 360 degree projection on large surfaces where the public will be close to the projected images, so the higher the resolution the better. I have been told that the quality is to be high enough that when standing beside the projected image the pixels must not be seen, which is a tall order I know. So it's 6 projectors in a circle, within a concave room of some sort, and the 7th projector facing up to fill in the gap at the top. I have to warp the images across all seven outputs so that it all fits in together. When number 1 and number 6 and top projectors meet, so that the images join well is up to who makes the content. Can the eVigilant products take the image from a TH2G?

[Mr_P]

Hi Paul

What is the 'eVigilant' products???

You can do this with 2 servers and 6 HD outputs... Just frame lock them together...

But 1920x1080 may not be the best resolution to use in this scenario... You may need more of a 4:3 ratio for this work... ?

Curved work Is always difficult to get right especially at the top - since the image can be highly 'squashed' depending how far up you blend.
blending a top 7th projector is almost impossible
(anyone else do comment...)

Since you mentioned a 7 th projector - I assume this would point vertically up?
Cant you just use a wide angle fx lense on a single projector (like the puffers sphere) to do the entire job?
Just a thought

S