Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 36

Thread: M329+FX4000 quadro problem

  1. #11

    quadro 4000 +triple head Display port

    refresh rate is 60 hz resolution is 3840x1024,3072x768, same defect, triple head display port on out one of quadro 4000 (display port )

  2. #12
    Quote Originally Posted by fabiopagano View Post
    refresh rate is 60 hz resolution is 3840x1024,3072x768, same defect, triple head display port on out one of quadro 4000 (display port )
    and the other output? the dvi output?
    does that work at this resolution?

    --

    start at the lowest possible output size and work up
    dont start at highest size and work down

  3. #13

    quadro 4000 +triple head Display port

    second out connected to triple head DVI at 3840 x1024 is ok ,primary out connected to triple head Dysplay port at 3840 x 1024 is ok but only when catalyst not is in full sceen mode, also whit resolution more little i have same issue,the triple head display port do not work stable
    Attached Images Attached Images
    Attached Files Attached Files

  4. #14
    Quote Originally Posted by fabiopagano View Post
    second out connected to triple head DVI at 3840 x1024 is ok ,primary out connected to triple head Dysplay port at 3840 x 1024 is ok but only when catalyst not is in full sceen mode, also whit resolution more little i have same issue,the triple head display port do not work stable
    what low resolutions you try? -with only DP connected

  5. #15

    quadro 4000 +triple head Display port

    i have tray whit 2400x 600,3072x768,3840x1024. Display port whitout triple head work ,i have try also triple head dvi whit adapter active displayport to dvi dual link , but resolution max for primary out is 2400x 600 second machine have 1 monitor for preview and 1 triple head DVI AT 3840X1024 for 3 screen and work well.I dont wont cut the big screen led 3660x1360 on two machine .

  6. #16
    Quote Originally Posted by fabiopagano View Post
    i have tray whit 2400x 600,3072x768,3840x1024. Display port whitout triple head work ,i have try also triple head dvi whit adapter active displayport to dvi dual link , but resolution max for primary out is 2400x 600 second machine have 1 monitor for preview and 1 triple head DVI AT 3840X1024 for 3 screen and work well.I dont wont cut the big screen led 3660x1360 on two machine .
    have you been able to get the display port triple head to work at any resolution?

  7. #17
    Quote Originally Posted by samsc View Post
    have you been able to get the display port triple head to work at any resolution?

    what settings are you using in the matrox powerdesk GXM control panel?

    Have you checked matrox technical support about using 2 different types of triple head at the same time?

    --

    you need 4.5M pixels - there are other configurations that might work?
    3 * 1920 * 1080 from a single triple head ( if this is possible ) ?

  8. #18
    You will probably need more than one Catalyst machine to accomplish this.
    I would recommend (x2) servers, each with a single TH2G and local monitor.

    The spec NVIDIA lists for this card very clearly shows the maximum resolution to be: 2560x1600 @ 60Hz
    http://www.nvidia.com/object/product...00-mac-us.html

    Todd is correct in stating that the general rule is to not use more than one TH2G per machine or two DH2G.
    Unless you are running at vey low resolution (x2) TH2G will most likely give you problems.

    Hope this helps.
    Best Regards,
    - Marty

  9. #19

    quadro 4000 +triple head Display port

    hi Richard, the technical guide says you can not use two different types of triple head under windows, but no restriction for mac user. yesterday i have update triple head DP whit software matrox but nothing change.in matrox power desk i have standard setting. I will try to use old catalyst quad core 3 ghz whit ge force 8800 for six out if possibile

  10. #20
    Quote Originally Posted by fabiopagano View Post
    hi Richard, the technical guide says you can not use two different types of triple head under windows, but no restriction for mac user. yesterday i have update triple head DP whit software matrox but nothing change.in matrox power desk i have standard setting. I will try to use old catalyst quad core 3 ghz whit ge force 8800 for six out if possibile

    Can you get anything at all out from display port? With triple head

    Start with a only single screen
    Then add another

Similar Threads

  1. Catalyst V4.4 M329 Peronality File Hog3
    By milus in forum Catalyst Technical support
    Replies: 1
    Last Post: 21-01-2011, 04:57 PM
  2. firewire problem
    By earns in forum Catalyst Technical support
    Replies: 11
    Last Post: 27-10-2009, 02:23 PM
  3. sync id problem
    By frankv1234 in forum Catalyst Technical support
    Replies: 2
    Last Post: 06-03-2009, 09:51 AM
  4. Opacity and Global Keystone Problem
    By SvenCRen in forum Catalyst Technical support
    Replies: 9
    Last Post: 02-09-2008, 07:49 AM
  5. Artnet problem
    By johnboylightboy in forum Catalyst Software
    Replies: 2
    Last Post: 04-06-2007, 01:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •