Page 5 of 6 FirstFirst 123456 LastLast
Results 41 to 50 of 57

Thread: Catalyst v4.4 m329

  1. #41
    very much! thank u nev....do we get to see ur handy work on eurovision this year?!

  2. #42
    I finally had some time to try out the new version. i really like the frame blending, works nice and easy, my first impression is that the frame blend is smother and looks better than the Hippo frame blending i will do an AB test and compare it to the Hippos frame blending. I just played around whit the new color FX and it really looks promising. I think i experienced increased performance but just upgraded my machines to OS X 10.6 at the same time, so it can be just the OS X.

    Thanks for some sweet new software!

  3. No problem.

    I have no idea if we will be involved in the Eurovision this year. It all depends on which lighting designer is chosen and the hire companies!!

    Fingers crossed!!!

    Nev.
    Nev Bull
    Pixels Plus Limited
    Digital Video Services

    Catalyst Software - Upgrades - Server Hardware - Accessories - Training - Support

    t: +44 (0)1494 858151
    skype: nevillebull
    e: nev@pixelsplus.co.uk
    w: www.pixelsplus.co.uk

  4. #44

    Road Hog Full Boar

    Is there a fixture Update to add all the new play modes to the Road Hog Full Boar. I can only find 2 of the audio play modes and I know there are more now.
    RHFB 3.1.7

    *nevermind- it takes two buttons*
    Ryan
    Last edited by RyWolf; 19-01-2011 at 09:29 PM.

  5. Thats a question for High End I think!

    Nev.
    Nev Bull
    Pixels Plus Limited
    Digital Video Services

    Catalyst Software - Upgrades - Server Hardware - Accessories - Training - Support

    t: +44 (0)1494 858151
    skype: nevillebull
    e: nev@pixelsplus.co.uk
    w: www.pixelsplus.co.uk

  6. #46
    I asked Steve to update the lib.
    In the webserver I cant find the DMX Values for those new modes
    Any idea where to look or where I can find an actual DMX Chart?

  7. #47
    Quote Originally Posted by mlorenz View Post
    I asked Steve to update the lib.
    In the webserver I cant find the DMX Values for those new modes
    Any idea where to look or where I can find an actual DMX Chart?
    i need to add them to the webserver docs -

    at the moment they are only on the pull down menu which selects the playmode

  8. #48
    Hi Richard,
    I am working with Catalyst m329 in GrandMA console, I created some libraries to work with Mix Type, etc.
    I am having the following problem, I pass in more parameters but I put this as an example.


    MIX Type
    Ch6 MIX Screen Left - 16 bit
    NO Change 0
    Position 1 to 30000.

    It often happens that if we have the Encoder in coarse mode and spent a 1, 2 etc and returning to 0 (1 step in coarse encoder 256 steps in fine) is not well reflected the movement, since a value 0 corresponds to no change .
    Thus the mix is half display when they should be left completely.

    This happens with all the parameters that have values of 0 and NO change.

    Any suggestions?

    Thanks
    E. Cueto

  9. #49
    Quote Originally Posted by escueto View Post
    Hi Richard,
    I am working with Catalyst m329 in GrandMA console, I created some libraries to work with Mix Type, etc.
    I am having the following problem, I pass in more parameters but I put this as an example.


    MIX Type
    Ch6 MIX Screen Left - 16 bit
    NO Change 0
    Position 1 to 30000.

    It often happens that if we have the Encoder in coarse mode and spent a 1, 2 etc and returning to 0 (1 step in coarse encoder 256 steps in fine) is not well reflected the movement, since a value 0 corresponds to no change .
    Thus the mix is half display when they should be left completely.

    This happens with all the parameters that have values of 0 and NO change.

    Any suggestions?

    Thanks
    E. Cueto
    its absolutely essential to have a 'no change value'
    otherwise you the poor end user -
    have to program every single value to do something - to be a default- even when you dont need it-

    you might just want to set one value in the mix setup -
    but without a no change - you cant do this

  10. #50
    Update on lib for the HOG3.
    I mailed Highend all infos, they will have an update ready in the next days.

Similar Threads

  1. Fixture CATALYST V4.20 m257 for GMA
    By luluyves in forum Catalyst Downloads
    Replies: 0
    Last Post: 24-04-2010, 02:34 PM
  2. Catalyst on Arcus boot Pro Light & sound
    By gillekes in forum Catalyst Announcements
    Replies: 9
    Last Post: 01-04-2010, 02:18 PM
  3. Vista Spyder Remote Access to Catalyst
    By Seantava in forum Catalyst Technical support
    Replies: 6
    Last Post: 26-03-2010, 11:51 AM
  4. External encoder input into Catalyst?
    By kmclights in forum Catalyst Technical support
    Replies: 3
    Last Post: 06-05-2009, 11:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •