Page 6 of 6 FirstFirst 123456
Results 51 to 57 of 57

Thread: Catalyst v4.4 m329

  1. #51

    negative values top lef since Arnet

    hi all
    control through the window of catalyst mixer, I can get negative values for Screen 1 and 2, TOP, LEFT, but since arnet NOT possible?
    Mix Type, channels 4,6, 12 and 14.

    A greeting

    E. Cueto

  2. Hi there

    not sure why you need to move the mix off of the screen? If you need to move content off, just use the Offset value instead?

    Nev.
    Nev Bull
    Pixels Plus Limited
    Digital Video Services

    Catalyst Software - Upgrades - Server Hardware - Accessories - Training - Support

    t: +44 (0)1494 858151
    skype: nevillebull
    e: nev@pixelsplus.co.uk
    w: www.pixelsplus.co.uk

  3. #53
    I'm working on the libraries for Ma
    It was just a technical question.
    thanks

  4. #54
    Quote Originally Posted by NevBull View Post
    Hi there

    not sure why you need to move the mix off of the screen? If you need to move content off, just use the Offset value instead?

    Nev.
    I used it in touring situations, 4 LED-Circles, each used 3 mixes (1 covering 120°), in smaller venues where we only could setup half-circles, it was much easier to shift the mixes off the screen then to redo the programming.
    I was necessary or easier to do it like this in combination with the mapping-controller for the LED-Screen (which was kind of "stupid")

  5. #55
    Quote Originally Posted by samsc View Post
    its absolutely essential to have a 'no change value'
    otherwise you the poor end user -
    have to program every single value to do something - to be a default- even when you dont need it-

    you might just want to set one value in the mix setup -
    but without a no change - you cant do this

    Would you please explain a little more the concept of -No change-.
    Referred to Catalyst.
    When I turn off the lamp from a moving light, select -Lamp OFF- and that if the default parameter of the lamp does -not change value-
    If I release the parameters of the -Clear ALL- lamp will turn back on past time.
    Here that I understand the value of "No change"

    But do not know, to transfer this concept to a Catalyst Mixer.

    Sorry for my ignorance.

  6. #56
    Quote Originally Posted by escueto View Post
    Would you please explain a little more the concept of -No change-.
    Referred to Catalyst.
    When I turn off the lamp from a moving light, select -Lamp OFF- and that if the default parameter of the lamp does -not change value-
    If I release the parameters of the -Clear ALL- lamp will turn back on past time.
    Here that I understand the value of "No change"

    But do not know, to transfer this concept to a Catalyst Mixer.

    Sorry for my ignorance.
    does not change values programmed already in catalyst gui


    catalyst is not a lamp - it has its own cue lists and presets - and values

  7. #57
    Quote Originally Posted by RyWolf View Post
    Is there a fixture Update to add all the new play modes to the Road Hog Full Boar. I can only find 2 of the audio play modes and I know there are more now.
    RHFB 3.1.7

    *nevermind- it takes two buttons*
    Ryan
    Which version did you use in your RHFB?
    HighEnd oder Catalyst as manufacturer?

    You must use Catalyst, then it should all be fine.

    I was in contact with Steve from Highend who takes care of the libs.
    I did some screenshots of the actual values from the pulldown menu and send those to him. He checked all values for m329 and they should all be fine he told me.

Similar Threads

  1. Fixture CATALYST V4.20 m257 for GMA
    By luluyves in forum Catalyst Downloads
    Replies: 0
    Last Post: 24-04-2010, 02:34 PM
  2. Catalyst on Arcus boot Pro Light & sound
    By gillekes in forum Catalyst Announcements
    Replies: 9
    Last Post: 01-04-2010, 02:18 PM
  3. Vista Spyder Remote Access to Catalyst
    By Seantava in forum Catalyst Technical support
    Replies: 6
    Last Post: 26-03-2010, 11:51 AM
  4. External encoder input into Catalyst?
    By kmclights in forum Catalyst Technical support
    Replies: 3
    Last Post: 06-05-2009, 11:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •