Page 1 of 6 123456 LastLast
Results 1 to 10 of 57

Thread: Catalyst v4.4 m329

Hybrid View

  1. #1

    Catalyst v4.4 m329

    Catalyst v4.4 m329 -

    download m329
    password configfoam

    This has been around and in testing for a while on lots of shows-

    10.5.8 and above - Intel processors only.

    Changes improvements
    --------------------------

    32 mixes 32 layers-
    Maximum image size 4480x2600 for full RED image size
    Improved proRes codec processing

    New colour FX architecture

    frame blending and other things-

    New visual fx for text and on screen information


    New layer playmodes
    step once forward
    bounce

    Mix
    Mix intensity -
    mix colour fx
    mix scaling and resize.

    Video input-


    New design for video input
    Crash with quicktime after 10.6.2 fixed

    Issues- things to look out for-


    Check your mix positions - visibility and width and height - they might have moved- if you are currently using m257
    This does not affect any presets or programming - just the saved onscreen position between restarts from m257
    Attached Files Attached Files

  2. #2
    what version of OSX does this require?

    it works fine on my personal laptop (OS X 10.6.4) but wont run on the mac pro i use for catalyst which has OS X 10.4.11. which v4.20 runs fine on

  3. #3
    Quote Originally Posted by hdmcc View Post
    what version of OSX does this require?

    it works fine on my personal laptop (OS X 10.6.4) but wont run on the mac pro i use for catalyst which has OS X 10.4.11. which v4.20 runs fine on
    needs apple libraries from 10.5.8 for some features - this is an apple thing

    tiger is not supported
    PPC also removed for same reasons

  4. #4

    Frame Blending& load presets

    Is there any documentation on the frame blending? I know on other systems these have to be certain file types.

    Is there a way to reload the preset file yet without closing the whole application?????

    Ryan

  5. #5
    I forgot to attach frame blending doc will do later
    Works with any movies

    -

    Changing presets files has some tricky issues I haven't finished dealing with yet.

  6. #6
    Join Date
    Jun 2008
    Location
    Winter Garden, FL USA
    Posts
    77
    Is it possible to get some DMX values documentation? Please

  7. #7

    fade out

    Delighted with the new version, Richard.

    I am working with DMX channels and I have a question about the difference between:

    Channel 47 - Mix TYPE ------ >Fade Out.
    Channel 1 - MIX COLOUR FX -->fade Out.

    Still I could not test them on the DMX Grand Ma
    A greeting and thank you very much for the new version.

    Eduardo Cueto

  8. #8
    Quote Originally Posted by escueto View Post
    Delighted with the new version, Richard.

    I am working with DMX channels and I have a question about the difference between:

    Channel 47 - Mix TYPE ------ >Fade Out.
    Channel 1 - MIX COLOUR FX -->fade Out.

    Still I could not test them on the DMX Grand Ma
    A greeting and thank you very much for the new version.

    Eduardo Cueto
    it looks like they do the same thing.

  9. #9

    autofade

    Care to explain play mode 51 Autofade and the step modes.
    I must be missing something

  10. #10
    Quote Originally Posted by RyWolf View Post
    Care to explain play mode 51 Autofade and the step modes.
    I must be missing something
    step play - change state between stop then step play it steps through the movie one frame at a time-
    useful when you want to step from from image to the next- i had a show with 8000 still images in a movie

    -

    autofade is an experiment for some users - its not finished

Similar Threads

  1. Fixture CATALYST V4.20 m257 for GMA
    By luluyves in forum Catalyst Downloads
    Replies: 0
    Last Post: 24-04-2010, 03:34 PM
  2. Catalyst on Arcus boot Pro Light & sound
    By gillekes in forum Catalyst Announcements
    Replies: 9
    Last Post: 01-04-2010, 03:18 PM
  3. Vista Spyder Remote Access to Catalyst
    By Seantava in forum Catalyst Technical support
    Replies: 6
    Last Post: 26-03-2010, 12:51 PM
  4. External encoder input into Catalyst?
    By kmclights in forum Catalyst Technical support
    Replies: 3
    Last Post: 06-05-2009, 12:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •