Help with new configuration/3 projectors

[ryanww]

I may be wrong but to my knowledge the express version only allows you to do 2 mixes which would require one per output to keystone the output.

However there may be a way around it. If you do a TH2G and make the whole canvas 1 mix, you could keystone each individual image using the visual effects on that layer and position it at that display.

Just an idea, not entirely sure that will work.

You can not use a decklink intensity with a laptop. You need to have a tower for that. And I highly doubt a macbook pro could handle doing that much of HD anyway. Your tower should be fine for that if its an intel based tower. Just make sure the decklink is compatible with that tower.


A tripple head2go will only do 3 of the same size output resolutions. If you have 3 separate resolutions, then choose a resolution that is the highest the oldest is compatible of such as 1024x768.

[Dr. Bot]

Ryan, Thanks for your reply! You are correct about the 2 mixes in Express. Using the TH2G and using the whole canvas as one mix and positioning it at the 3 different locations, sounds like it may work, in theory. I will try that. It sounds like I'm going to need some more layers... I smell an upgrade in my future.

Does this sound feasible to any one else?