Not used the ELC Node6 myself - but it sounds like that might work.
The Luminex box has a function to be able to switch between 2 controllers via a single DMX chanel trigger - which is how I've done it in the past.
My only thought is that an LTP merge may not be ideal if the 'other' controller changes - a switch function might be more reliable...
However, If you only have static colours programmed on the MA - it might be easier just to re-program those cues using catalyst/pixelmad as the controller (very easy) and have the stage bars permanently connected to catalyst - thus avoiding any merging or switching scenarios.
Simon
Simon Pugsley
SNP Productions Ltd. (UK)
Lighting & Video Control Solutions
Catalyst|Sales|Hire|Training|Support
Catalyst Dealer UK Europe & Worldwide...
Office: +44 (0)1908 410129
Mobile: +44 (0)7958 390034
simon@snp-productions.co.uk
www.snp-productions.co.uk
Thanks Simon. I am going to have to remove the existing Stagebar programming anyways, I am running them in a different channel mode this go around.
The reason I want to use them from both the Console and from the Catalyst is because I have a few effects that I have in mind that I can knock out real quick with the effects engine.
Thanks to everyone for the help, I think I have everything configured how I need it. Now I just have to get the rig in front of me and go at it. Unfortunately that doesnt happen for another 3 weeks.
it seems to indicate here elc node 6 does htp merge:
http://www.elclighting.com/web/index...d=122&Itemid=4
not used or tested myselfFeatures:
Remote programming and monitoring
DMX input options like Normal and Backup
DMX output options like:
- Normal
- Merging in HTP / LTP or custom
- Priority merging
- Merging with softpatch
I'm using ELC node8 and you can do HTP merge or LTP merge in each output, same as Luminex.
you need an htp merge- to control from 2 different devices-
you will have to check whether your box will do an HTP merge-
artnet is just a ethernet protocol its doesnt do any merging - it depends on the interface box
LTP merging wont work - as both devices are going to be sending information at the same time-