Results 1 to 2 of 2

Thread: Spectrograph

  1. #1

    Spectrograph

    Need a little help...

    I am trying to use the Spectrograph function.
    Visual FX DMX = 123.

    I only use Catalyst once a year.
    It's on a Power Mac G5.
    It has Catalyst PM V4.1 m119

    I have two choices for plugging audio in.
    First is the built in mono Audio In on the back of the box.
    The manual says it's for a "microphone or other self powered devices."
    Second is an audio/video card that is installed (AlchemyTV).

    The only way I can get it to work is by plugging into the built in Audio In.
    But then I only get one channel (it looks like).

    If I use the Alchemy input I can see audio in the G5 system's Sound control screen, but the Catalyst won't let me select it on the Control Panel. It lists it but when I select it from the drop down, it just stays in the Line In.

    I have the Parameter 1 (FX1) set for 0 and I get a waveform that appears to only be on the left half of the screen. Am I missing a channel or is that it?

    What's up?
    "Cool as a moose"
    Cat

  2. #2
    Catalyst in that version works with the systems default sound input

    you select that in the system sound control panel

    spectrograph is only for a single channel at a time

    Quote Originally Posted by ChrisTall View Post
    Need a little help...

    I am trying to use the Spectrograph function.
    Visual FX DMX = 123.

    I only use Catalyst once a year.
    It's on a Power Mac G5.
    It has Catalyst PM V4.1 m119

    I have two choices for plugging audio in.
    First is the built in mono Audio In on the back of the box.
    The manual says it's for a "microphone or other self powered devices."
    Second is an audio/video card that is installed (AlchemyTV).

    The only way I can get it to work is by plugging into the built in Audio In.
    But then I only get one channel (it looks like).

    If I use the Alchemy input I can see audio in the G5 system's Sound control screen, but the Catalyst won't let me select it on the Control Panel. It lists it but when I select it from the drop down, it just stays in the Line In.

    I have the Parameter 1 (FX1) set for 0 and I get a waveform that appears to only be on the left half of the screen. Am I missing a channel or is that it?

    What's up?

Similar Threads

  1. sectrograph
    By gillekes in forum Catalyst Software
    Replies: 3
    Last Post: 09-09-2009, 10:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •