Does the Phoenixcard genlocks it's self?

[samsc]

Hi Nev

I'd like to genlock the SDI input, not the output. The output is DVI-D and allready clocked to the projecter.

At the moment I can't think of an external device that genlocks the SDI signal en goes back in to the mac and tell catalyst here is your clock...

any suggestions?

cheers Michel

there is no genlock - in computer video world- you have to really remember vga and dvi are not video signals as per the world of sdi and hdsdi- VGA and DVI clock rates have nothing to do with sdi clock rates-

nothing is synchronised together- everything is frame buffered - genlock comes from a technological era when nothing was frame buffered - and mixers had to work with the video signal without being able to store it.

projectors generally do completely their own thing - they arent locked to anything - except the technology inside them which follows its own rules- with DLP its the DLP rates.

[buchie]

We loose 16 frames in total, which is not acceptable.
we measured:
4-5 frames from connected phoenix source to CLM R10+ we should see this drop when we use the native resolution of the projector.

No DVI extenders, only a geffen spiltter

9-10 frames for the camerachain, which is outrageous, but that is because nothing is genlocked. It should be 1-2 frames...
we try to advise the company with a genlock plan.


testing testing....

cheers Michel

[samsc]

We loose 16 frames in total, which is not acceptable.
we measured:
4-5 frames from connected phoenix source to CLM R10+ we should see this drop when we use the native resolution of the projector.

No DVI extenders, only a geffen spiltter

9-10 frames for the camerachain, which is outrageous, but that is because nothing is genlocked. It should be 1-2 frames...
we try to advise the company with a genlock plan.


testing testing....

cheers Michel

thats nothing to do with genlock- (genlock is just a way of synchronising the frames on video equipment before digital signal processing was fast enough )

genlock doesnt do anything to this at all-

this is the digital video processing pipeline.

every single piece of digital video equipment - including imagepro projectors cameras catalyst and whatever else - has to buffer at least a frame- and possible many more

imagepros have quite big delays when in certain modes....

---

exactly what do you mean by 9-10 frames for the camera chain? - please detail every single piece of equipment including splitters.

( on a large rock show 9-10 frames is 1/3s which is a distance of 100m for sound - so usually 9-10 frames means the video is in sync with the sound at front of house! )
light and sound reach the audience at vastly different speeds and on large shows the sounds is only 'in sync' at a certain distance - and at no other- if it is in sync for the band playing - then its not in sync for anyone in the audience ....