Results 1 to 5 of 5

Thread: catalyst 4.20

  1. #1

    catalyst 4.20

    I was using Catalyst v 4.20 with the phoenix card, but finally I changed to a previous version and the lfg4 card. with the beta and the phoenix I had a lot of problems, all days the system blocks one time but yesterday , I had 3 system blocks. when I was using the live input and then run a video on a different layer, it blocks.

    Before I changed to the lfg4, I try to change to a black magic hd but I have no video input, I tried blackmagic different drivers with no results, maybe I have a conflict between phoenix ,lfg4 and blackmagic drivers.

    my OS is 10.5.8

    any idea?


    34 layers??? it´s crazyyyy

  2. #2
    The active silicon cards can be a little finicky if you are switching them. The best practice is to uninstall all the drivers and remove all traces. Then reinstall them.

    Honestly, if you have problems, sometimes putting a fresh Leopard image on the disk and installing from scratch is best.
    SourceChild
    TODD SCRUTCHFIELD

    ...if it ain't broke...
    gimme 5 and then don't act surprised

  3. #3
    Join Date
    Sep 2006
    Location
    France
    Posts
    2
    HELP me please! I can't touch richard and i need the version of phoenix card. The show start tomorow. Please please send me a link where i can download this version. Thanks a lot. Jekel@harkan.fr

  4. #4

    A similar problem

    Hi i had a similar problem where input from backmagic would freeze when i enabled lfg, so with a lot of playing i found by wiping prefs file and starting from scratch, enabling blackmagic first and lfg second that problems disspaeared, that show then was always stable, but any messing with the setup prefs after initial setup seemed to screw it up again, so definite bug or conflict of some sort but a little patience and it can be made work

  5. #5
    Join Date
    Oct 2004
    Location
    UK - Milton Keynes
    Posts
    807
    Quote Originally Posted by Mick Murray View Post
    enabling blackmagic first and lfg second that problems disspaeared, so definite bug or conflict of some sort but a little patience and it can be made work
    Its not a bug - just the way the blackmagic drivers work

    if you use a blackmagic card AND an active silicone card (LFG or Phoenix) you have to enable the blackmagic card on the FIRST video input window in catalyst. Blackmagic Drivers ONLY support one card.

    i.e.
    Video input 1 = Blackmagic
    Video input 2 = LFG-1
    Video input 3 = LFG-2
    Video input 4 = LFG-3
    Video input 5 = LFG-4

    Quote Originally Posted by miguelangelpinheiro View Post
    I was using Catalyst v 4.20 with the phoenix card, but finally I changed to a previous version and the lfg4 card. with the beta and the phoenix I had a lot of problems, all days the system blocks one time but yesterday , I had 3 system blocks. when I was using the live input and then run a video on a different layer, it blocks.

    Before I changed to the lfg4, I try to change to a black magic hd but I have no video input, I tried blackmagic different drivers with no results, maybe I have a conflict between phoenix ,lfg4 and blackmagic drivers.
    I frequently swap between LFG / Phoenix / Decklink HD Extreme / Intensity PRO. and have no issues. - There is no evidence that any of the drivers 'conflict' with each other when installed at the same time. The key is to take it ONE step at a time:

    1) Remove the cards
    2) restart
    3) install cards 1 by one
    4) (install drivers -1 by one if necessary for relevant card)
    5) restart as drivers require
    6) start with 'clean' version of catayst with no setings
    7) configure cards 1-by-1
    8) test inputs 1-by-1
    9) repeat from step 3 as necessary for EACH card.

    if you use settings from an old catalyst show - it will probably fail...
    it you try and put all the cards in at once - it will probably fail...
    if you try and install all the drivers at the same time without restarting - it will probably fail...

    Re Phoenix cards:
    Particular Mac hardware revisions still cause some issues, especially on old 2007 MacPros. When using phoenix, you REALLY have to know what you are doing and be aware of the limitations of your system before you can expect it to work reliably. From 2007-2009 there were 5 different MacPro hardware revisions - each one can cause different and un-expected results. - BE WARNED!...

    Simon
    Simon Pugsley

    SNP Productions Ltd. (UK)
    Lighting & Video Control Solutions
    Catalyst|Sales|Hire|Training|Support
    Catalyst Dealer UK Europe & Worldwide...

    Office: +44 (0)1908 410129
    Mobile: +44 (0)7958 390034
    simon@snp-productions.co.uk
    www.snp-productions.co.uk

Similar Threads

  1. video switcher control via catalyst
    By Johnny in forum Catalyst Technology questions
    Replies: 14
    Last Post: 22-09-2008, 08:15 PM
  2. QT autostart on catalyst macpro
    By Peter in forum Catalyst Technology questions
    Replies: 6
    Last Post: 27-08-2008, 08:52 AM
  3. Booting Catalyst on Start up
    By johnboylightboy in forum Catalyst Technical support
    Replies: 5
    Last Post: 05-04-2008, 06:32 AM
  4. Catalyst v4 library parameters for Hog consoles
    By Gian in forum Catalyst Technical support
    Replies: 1
    Last Post: 23-05-2007, 01:24 PM
  5. XServe RAID and catalyst
    By samsc in forum Catalyst Technology questions
    Replies: 28
    Last Post: 21-01-2007, 10:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •