Matrox Triple Head not recognized!!

[samsc]

one movie was 295 Kbit/s

the problem is you had apple remote desktop on all the time-

running remote desktop with 6 triple head outputs at 6144 x 768 pixels!!!! kills the playback performance.

it kills playback stability even at lower resolutions.
nothing to do with movies.

[emilianomorgia]

the problem is you had apple remote desktop on all the time-

running remote desktop with 6 triple head outputs at 6144 x 768 pixels!!!! kills the playback performance.

it kills playback stability even at lower resolutions.
nothing to do with movies.

yeah that may be kill performances but this is was not the case .

4 Animations 768x1024 was requesting 1200 Kbit/s !!!!

I see that as problem .

Indeed ARD should be turn off during showtime ( if your set up allow you to do so )

[samsc]

yeah that may be kill performances but this is was not the case .

4 Animations 768x1024 was requesting 1200 Kbit/s !!!!

I see that as problem .

what do you mean 1200KBit/s ? that is not very much - are you meaning a low or a high number?
can you get hold of the files?

Indeed ARD should be turn off during showtime ( if your set up allow you to do so )

you have to turn off ARD or it will simply not work- you have 2 triple heads and ARD previewing 6x1024x768 screen - this just does not work well enough.
End of story - doesnt matter about whether your setup will allow it -

you want to play back video properly?- or you want to use ARD? - its a simple choice.
ARD kills things across the board -whether you are playing back movies or doing nothing.

[emilianomorgia]

Can you pls consider to add a command in the Web server to turn ARD on / off ?

[samsc]

Can you pls consider to add a command in the Web server to turn ARD on / off ?

not sure what you mean?

ARD has 2 components - it has a client- called the vnc server which runs on the computer to watch - and a remote viewer application that in this case is called Apple remote desktop ( ARD )-

When ARD is not running on the remote computer - it doesnt do anything on the computer being watched- it has no impact on performance-

Performance is only impacted when the computer is being observed - if you arent observing the screens nothing bad happens-

[emilianomorgia]

oh well in this case I had no problems , since I was not using it during showtime .

the remote management was on but I was not obverse the Remote MacPro while I was programming . I've used only to do the keystone

[samsc]

oh well in this case I had no problems , since I was not using it during showtime .

the remote management was on but I was not obverse the Remote MacPro while I was programming . I've used only to do the keystone

back to the movies-
what was the data rate?

do you still have these files?can you get them?