Quote Originally Posted by samsc
use an ethernet switch - not a hub.
A switch allows each network port to set its own speed.

and dont use a crossover cable.
I own 3 products from the Artistic Licence Range and have never had any problems. I created a separate profile in networking Called Artnet. In Network preferences On the TCP/IP tab I have configuration set to manual. An IP address of 2.0.0.134 Subnet of 255.255.255.0 and everything else blank. On the Ethernet tab Configure is set to automatic. I doubt it makes any difference but I also have person file sharing enabled. I then simply use a patch cable to connect between the Mac and the Etherlynx. The yellow light should come on immediately and the network will be established. This works on my G4's, G5's and Powerbook.