Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 46

Thread: Catalyst v4.1 m152

  1. #31
    Hey Richard,

    Would you be willing to conduct testing for the Macbook Pro using m150 the same way you did it on the 2.66 quad and 3Gb 8-core using the Mtron?
    SourceChild
    TODD SCRUTCHFIELD

    ...if it ain't broke...
    gimme 5 and then don't act surprised

  2. #32
    Quote Originally Posted by SourceChild View Post
    Hey Richard,

    Would you be willing to conduct testing for the Macbook Pro using m150 the same way you did it on the 2.66 quad and 3Gb 8-core using the Mtron?
    what do you mean? dont quite understand

  3. #33
    Quote Originally Posted by samsc View Post
    m147 -Preliminary tests on 8Core Mac Pro3.0Ghz with MTRON 32GB SSD Internal 3.5Inch. x1900 4GB ram.

    Apple intermediate codec

    512x512 14 layers @ 25fps
    640x480 14 layers @ 25fps
    720x486 14 layers @ 25fps
    720x576 14 Layers @ 25fps
    768x576 14 layers @ 25fps
    800x600 14 layers @ 25fps
    1024x768 10 layers @ 25fps
    1280x720 9 layers @ 25fps
    1440x1080 8 layers @ 25fps
    1920x1080 7 layers @ 25fps
    2048x1080 7 layers @ 25fps
    3072x768 5 layers @ 25fps
    4096x2048 1 layer @ 25fps

    The avantage of MTRON over rotating discs - is that there are no dropped frames.
    And this performance is consistent over every file - regardless of capacity or size of file or disc free space
    Richard,

    You conducted extensive testing in this other thread showing frame rate and ultimately spit out results for different resolutions. I was eagerly hoping you would do the same for your Macbook Pro and publish them for us.

    I am interested in knowing how many layers I could run of DV, PhotoJPG, and Apple Intermediate Codec on a Macbook Pro as a single output and then also using a DualHead2Go or TripleHead2Go on a Macbook Pro.
    SourceChild
    TODD SCRUTCHFIELD

    ...if it ain't broke...
    gimme 5 and then don't act surprised

  4. #34
    Quote Originally Posted by SourceChild View Post
    Richard,

    You conducted extensive testing in this other thread showing frame rate and ultimately spit out results for different resolutions. I was eagerly hoping you would do the same for your Macbook Pro and publish them for us.

    I am interested in knowing how many layers I could run of DV, PhotoJPG, and Apple Intermediate Codec on a Macbook Pro as a single output and then also using a DualHead2Go or TripleHead2Go on a Macbook Pro.
    there are rather a lot of different models of mac book pro's!
    with different firewire ports and configurations and bus speeds- and different graphics options.
    they dont have anywhere near the bus bandwidth or graphics power of desktop machines-

    with laptops you have to use a different strategy - begin with very low expectations and move upwards if it works.

    ---

    do you have a mac book pro yourself?

  5. #35
    m152-
    Added mix size of 1400x 1050. thanks hilary
    people need more sub mixes- changed mixes to lite-4 express-6 dv-8. jojo.
    fixed crash with random release from hog with framestore playback. thanks spooky.
    increased submix size to 1680x1200- ( this is really pushing things on older machines.... ).

  6. #36
    Join Date
    Feb 2004
    Location
    Melbourne, Australia
    Posts
    163
    There is still the issue of the size jumping if you are trying to resize the largest size mix.

    My scenario is that we are using a Spyder to spread a single output of a 1900xt at 1920 x 1600 over 2 projectors. Ideally I want the mix to be 1920 x 612 pixels. If I size the mix to 1920 x 1080 as per the menu in Mix options it goes to that size no problem. But if I want to drag the corner up to get my 612 size the width snaps to 1710 pixels.

    I can get around this with cropping and positioning on the Spyder but I would really like to have it on the Catalyst so I can preview the image at the source and see that my sizing is all correct and that my custom artwork looks as it should.

    Cheers

    Toby

  7. #37
    Quote Originally Posted by tharding View Post
    There is still the issue of the size jumping if you are trying to resize the largest size mix.

    My scenario is that we are using a Spyder to spread a single output of a 1900xt at 1920 x 1600 over 2 projectors. Ideally I want the mix to be 1920 x 612 pixels. If I size the mix to 1920 x 1080 as per the menu in Mix options it goes to that size no problem. But if I want to drag the corner up to get my 612 size the width snaps to 1710 pixels.

    I can get around this with cropping and positioning on the Spyder but I would really like to have it on the Catalyst so I can preview the image at the source and see that my sizing is all correct and that my custom artwork looks as it should.

    Cheers

    Toby
    the limit is 1680 + a little bit-
    im really concerned about performance on older machines.
    this really has a serious impact on graphics cards.

  8. #38

    Folsom ImagePro control panel

    Image Pro control

    Recent software builds after around m145 - have included my experimental direct folsom imagepro control panel

    http://video.folsom.com/products/?in...70327722_18404

    I have written a control panel to read and write parameters directly to the imagepro over ethernet-

    You can read the settings on all 4 inputs.
    Switch between inputs.
    Enter exact zoom and scale positions.

    To use the device- you need to set the imagepro to use a static ip address
    To enter the address of the imagepro into catalyst - you click were it says N/A - then type in the address of the device-
    When you click OK they should start talking to each other.
    Attached Images Attached Images

  9. #39
    That's great... Screen Pros are the next ?

    Regards

    Gian
    Gian
    Ibeam SP
    SP, Brasil

  10. Talking

    Hi chers.
    I tested FOLSOM/BARCO IMAGE PRO SD (standard definition)with:
    powerpoint 1024 x 768 presentation on PC Laptop in VGA mode in
    and SDI output,connected to black magic Extreme HD of my Catalyst.

    Working fine at best resolution.
    You need to select "INTERLACE OFF" in the HUD input control panel,
    relatively to the input are you using.

    This features is good during "CONVENTION" where people to use
    POWERPOINT presentation.
    On wednesday il will check the same test using

    FOLSOM/BARCO IMAGE PRO HD (high definition)
    to import high resolution POWERPOINT presentation.

    Thanks Richard


    Roberto Novelli
    CATALYST & SAMSC Product dealer for ITALY

    Product Manager & Technical Support
    roberto_novelli@ianiro.com
    IANIRO ALDO srl.

    helpdesk : ianiro@ianiro.com
    http://www.ianiro.com
    Sede principale/Head Office : Via Ragusa, 5
    Logistica/Logistics : Via Ragusa, 3
    00040 Pavona (Roma)- ITALY
    +39 06 9310198 ra tel
    +39 06 93162162 fax

Similar Threads

  1. Catalyst v4 library parameters for Hog consoles
    By Gian in forum Catalyst Technical support
    Replies: 1
    Last Post: 23-05-2007, 12:24 PM
  2. XServe RAID and catalyst
    By samsc in forum Catalyst Technology questions
    Replies: 28
    Last Post: 21-01-2007, 09:08 PM
  3. Catalyst v4 Universal binary - preview 1 - m34
    By samsc in forum Catalyst Downloads
    Replies: 4
    Last Post: 10-03-2006, 10:49 PM
  4. The Catalyst Digital Switcher Wing
    By litemover in forum Catalyst Feature requests
    Replies: 5
    Last Post: 19-04-2004, 10:45 AM
  5. Which Laptop can I run Catalyst or PixelMAD on?
    By samsc in forum Catalyst Technology questions
    Replies: 1
    Last Post: 08-04-2004, 05:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •