i posted m150.
fixes a few little glitches - for details see first post.
please also report experiences with apple intermediate codec.
thanks.
i posted m150.
fixes a few little glitches - for details see first post.
please also report experiences with apple intermediate codec.
thanks.
What's the problem there ?
Why I can't see mix previews ?
only works for keystone and curved mixes for now.
Hey Richard,
Would you be willing to conduct testing for the Macbook Pro using m150 the same way you did it on the 2.66 quad and 3Gb 8-core using the Mtron?
SourceChildTODD SCRUTCHFIELD
...if it ain't broke...
gimme 5 and then don't act surprised
Richard,
You conducted extensive testing in this other thread showing frame rate and ultimately spit out results for different resolutions. I was eagerly hoping you would do the same for your Macbook Pro and publish them for us.
I am interested in knowing how many layers I could run of DV, PhotoJPG, and Apple Intermediate Codec on a Macbook Pro as a single output and then also using a DualHead2Go or TripleHead2Go on a Macbook Pro.
SourceChildTODD SCRUTCHFIELD
...if it ain't broke...
gimme 5 and then don't act surprised
there are rather a lot of different models of mac book pro's!
with different firewire ports and configurations and bus speeds- and different graphics options.
they dont have anywhere near the bus bandwidth or graphics power of desktop machines-
with laptops you have to use a different strategy - begin with very low expectations and move upwards if it works.
---
do you have a mac book pro yourself?
Hi chers.
I tested FOLSOM/BARCO IMAGE PRO SD (standard definition)with:
powerpoint 1024 x 768 presentation on PC Laptop in VGA mode in
and SDI output,connected to black magic Extreme HD of my Catalyst.
Working fine at best resolution.
You need to select "INTERLACE OFF" in the HUD input control panel,
relatively to the input are you using.
This features is good during "CONVENTION" where people to use
POWERPOINT presentation.
On wednesday il will check the same test using
FOLSOM/BARCO IMAGE PRO HD (high definition)
to import high resolution POWERPOINT presentation.
Thanks Richard
Roberto Novelli
CATALYST & SAMSC Product dealer for ITALY
Product Manager & Technical Support
roberto_novelli@ianiro.com
IANIRO ALDO srl.
helpdesk : ianiro@ianiro.com
http://www.ianiro.com
Sede principale/Head Office : Via Ragusa, 5
Logistica/Logistics : Via Ragusa, 3
00040 Pavona (Roma)- ITALY
+39 06 9310198 ra tel
+39 06 93162162 fax
You could of course try a Decklink Intensity...
Get a display capable of displaying 720p60 or an Image Pro HD, program a DVI detective with the EDID information. Plug it into your laptop, and plug a DVI to HDMI cable to connect the output of the DVI detective to go into the Decklink Intensity. Set Catalyst Video Input to look at the Decklink Intensity at 720p60 and off you go... No deinterlacing required (which effectively reduces the resolution), and RGB...
Just a thought...
Hugh
The Intensity absolutely KILLS performance and reduces framrates by half. I wouldn't go this route.
The Decklink Extreme HD is now the only option for mac pros (895USD)
Christian Choi