Results 1 to 10 of 16

Thread: DVI exstenders

Hybrid View

  1. #1

    Smile DVI extenders

    Permit me to reply,
    Our client purchased a Thinklogical DCS fiber switcher with the Vis 23 Transmitters and recievers.

    The TX and Rx boxs can be joined by a ST fiber and work independently

    but we wanted the system to work via a matrix... it worked out of the box in Vegas for the Latin Grammys and image quality was stunning.

    the Txs all have a monitor loopthrough and store the EDID data-- they can also power via DVI

    The Rx have two DVI outputs - perfect for hot backup projectors and have Multi voltage Powersupplys --- very usefull in USA with 208v projectors.

    Control is ONLY via IP ----one slight down side is a lack of a confidence display on the DCS.... but i am talking to the tech team at Think Logical currently.

    Currently its just sitting on the desk, but hopefully next week it will be intergrated into a rack with the Raid array and some other toys.

    We use standard orange patch fibers for local runs (cheap) and purchased 300ft Mil spec 4 cores for the projector feeds ---shame they are Black ---look just like a dmx cable.

    One thing i would add is that even though we could use a Cat - DCS -Screen path we will still have a whole pile of Image Pros in the system doing SDI feeds to Plasmas and OB trucks --- AND providing a confidence monitor.

    blessed is the Image Pro and all who sail/fly with one

    My collegue FOH (JR) has a SDI to DVI device that we were hoping to test on this show as a return back from the OB truck but play time is over... its show time..

    Regards

    IanH ---- as normal sitting round the back in the dark

    PS ----RB is a God---

    Miracle One ---Screen warping ---- september tour, 2 hours to show -- we need a screen --got screen and projector, rigged both after doors projector at least 25 degrees off access and over shooting ---catalyst warped image in perfectly in seconds and that included the phone call for advice on how.
    oh we used an image pro on SDI input of cat to mix clients DVD and TXT computer
    Miracle two. ---- Blending -- with over 30years experiance of wide screen i was a catalyst blending sceptic, Encore yes, Spyder yes.. But for the LGs we used dual outputs of 1920 with blending for a forty foot screen - well chuffed with the blend ---(the dust stayed on the blendpro box) --

    feel free to ask if you need more info,

  2. #2
    Ian,

    I have more questions. Email me when you get the chance.

    SourceChild AT Runbox DOT com

    Todd
    SourceChild
    TODD SCRUTCHFIELD

    ...if it ain't broke...
    gimme 5 and then don't act surprised

Similar Threads

  1. A DVI to SDI conversion box from Gefen
    By samsc in forum Catalyst Technology questions
    Replies: 6
    Last Post: 05-07-2007, 10:19 AM
  2. Activate DVI Output on a Radeon X800 - how does that work?
    By bright in forum Catalyst Technology questions
    Replies: 1
    Last Post: 17-01-2006, 05:50 PM
  3. Apple DVI to video adaptor
    By samsc in forum Catalyst Technology questions
    Replies: 0
    Last Post: 25-02-2005, 11:22 AM
  4. DVI info page
    By samsc in forum Catalyst Technology questions
    Replies: 0
    Last Post: 22-12-2004, 03:37 PM
  5. Im using versatile. How do I buffer the dvi signal?
    By samsc in forum Catalyst Technology questions
    Replies: 0
    Last Post: 02-02-2004, 08:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •