Preset Focus and Soft Edge?

[gazzer82]

Ah yes thats quite a goof way of going about it that i hadn't thought of, though this would only works if there where no other x+y values called after you had set the preset, so i guess you would have to make sure you called the default x+y preset before each cue, which is no biggy i suppose.

For the soft edging i will give this ago, seems simple enough, though i though that is you assigned the layer to multiple sub-mixes it would appear on the same x=y on each sub-mix, is this not the case?

I think he means what i was implying, that dmx value 1 is a go command, so no matter what cue is currently selected, dmx preset 1 will trigger the next one, in the same way midi show contol go works. Also whilst we are on the subject, it would also be great to have another three presets for moving around in the cue list from
the desk, so it would be :-

DMX Value 1 - Go
DMX Value 2 - Back One Cue
DMX Value 3 - Forward One Cue
DMX Value 4 -Go to first cue and wait.

I know a lot of this can be acieved from Midi Show Control, but support for it is very bad on certain desks, and non existant on others, also i don't know many venues that have Midi tie lines and boosters/splitters.

Cheers

Garerth

[samsc]

Ah yes thats quite a goof way of going about it that i hadn't thought of, though this would only works if there where no other x+y values called after you had set the preset, so i guess you would have to make sure you called the default x+y preset before each cue, which is no biggy i suppose.

this means that every parameter can has a 'preset focus' type of behaviour - 'preset focus' is too limited- this also means you can keep play commands, file commands, and colour fx etc on different presets -
breaking down the programming in a more flexible way.

For the soft edging i will give this ago, seems simple enough, though i though that is you assigned the layer to multiple sub-mixes it would appear on the same x=y on each sub-mix, is this not the case?

did you play with the mix offsets?

I think he means what i was implying, that dmx value 1 is a go command, so no matter what cue is currently selected, dmx preset 1 will trigger the next one, in the same way midi show contol go works. Also whilst we are on the subject, it would also be great to have another three presets for moving around in the cue list from
the desk, so it would be :-

DMX Value 1 - Go
DMX Value 2 - Back One Cue
DMX Value 3 - Forward One Cue
DMX Value 4 -Go to first cue and wait.

I know a lot of this can be acieved from Midi Show Control, but support for it is very bad on certain desks, and non existant on others, also i don't know many venues that have Midi tie lines and boosters/splitters.

Cheers

Garerth

you could do this by programming a cue list to respond to dmx presets that do these things.

[tharding]

I think you will find if you get the mix offset and blending working that your first issue will go away. I used to have to use the method you describe before the offset option became available. Now I treat the entire Panorama as one canvas so I no longer need to align clips or images.

Cheers

Toby