Ghosting? - of sorts

[samsc]

are all your trails parameters set to zero?

i have been working on making this work in the submixes
this didnt used to work in keystoned sub-mixes

[emilianomorgia]

are all your trails parameters set to zero?

i have been working on making this work in the submixes
this didnt used to work in keystoned sub-mixes

thanks Richard for this usefull information , now I understood why it was not always working correctly .

Thanks

E

[Mr_P]

Well... as usual... the problem was between the desk and the chair....

This didn't turn out to be a catalyst problem on further investigation. (Thankfully)

The client had 2 problems:
1) - Dodgy DMX cable
2) - Hog III programming issues, resulting from using 'record-remove' in a specific cue, coupled with using a blend layer 2 effect in an earlier cue1 - due to tracking, the result was this ghosting effect.

With a bit of re-programming and DP2000 reset - all is well...

Thanks for the suggestions though

Simon

[samsc]

Well... as usual... the problem was between the desk and the chair....

This didn't turn out to be a catalyst problem on further investigation. (Thankfully)

The client had 2 problems:
1) - Dodgy DMX cable
2) - Hog III programming issues, resulting from using 'record-remove' in a specific cue, coupled with using a blend layer 2 effect in an earlier cue1 - due to tracking, the result was this ghosting effect.

With a bit of re-programming and DP2000 reset - all is well...

Thanks for the suggestions though

Simon

i have been fiddling with this - so i could have broken something too.