try removing card and putting it back in.
your card gave an error message - i have sent an email to active silicon asking what the error means.
try removing card and putting it back in.
your card gave an error message - i have sent an email to active silicon asking what the error means.
Hi Richard,
Thanks for the update. I have now tried the following
1. remove incorrect drivers and re-install those provided by yourself.
2. remove the card and reinstalled.
3. alternative settings for the bus.
4. remove the additional graphics card and the internal usb card.
5. try all three spare slots.
6. try the above with both 97 and 111 versions. What I have noted is that even if I re-install 97, the first of the four video screens is titled "DV Video - ADVC-110" which I suspect is remaining from my tesp with the Canopus unit.
7. A Canopus ADVC110 unit works with both 97 and 110.
Any further idea's other than the issue with AS card. I have attached the latest PDF.
Thanks
ian
i have no idea.
quite a few people have got it working even last week.
noone in the last few weeks has reported anything like this.
---
Im awaiting a reply from Active silicon about error message.
the card driver reports an error message in the log
I dont expect a reply before monday.LFG 1 Error LFG_DRV_Open status 1f030002 - message Open call to CDA library failed***
As a last resort you might like to try installing all the updates that apple made last week.
Richard,
Thanks again, I have installed the apple files without success. I have also re-installed all the Catalyst sw along with the drivers for the card, again without succes.
I have noticed that there appear to be two versions of the card driver, 2.0 and 2-1.0, I have installed the latest.
Looks like the answer ies with AS, possibly a faulty card???
Thanks and have a good weekend.
Ian
yes.
i got an error message from their driver - so im waiting for their reply.
i confirm.
i'm working with LFG4 and under guide by Richard,i used
as-lfg-mac-sdk-v02_00_00.dmg and LFG direct driver 2.0.dmg
after enabled it all video input was ok.
Roberto Novelli HighEndSystem dealer for ITALY
Product Manager & Technical Support
roberto_novelli@ianiro.com
IANIRO ALDO srl.
helpdesk : ianiro@ianiro.com
http://www.ianiro.com
Sede principale/Head Office : Via Ragusa, 5
Logistica/Logistics : Via Ragusa, 3
00040 Pavona (Roma)- ITALY
+39 06 9310198 ra tel
+39 06 93162162 fax
ian i read on your profile this specs:
21:22:26 ian-parkins-computer : User picked Easy Install
Mar 2 21:22:26 ian-parkins-computer : Choices selected for installation:
Mar 2 21:22:26 ian-parkins-computer : Upgrade: "Active Silicon LFG VDig"
Mar 2 21:22:26 ian-parkins-computer : as-lfg_vdig-1_5.pkg : uk.co.activesilicon.lfgvdigx : 1.5.0.1.5
and this:
21:22:27 ian-parkins-computer : Preparing local booted disk
Mar 2 21:22:27 ian-parkins-computer : Create temporary directory "/private/tmp/as-lfg_vdig-1_5.pkg.210EJAWe6"
Mar 2 21:22:27 ian-parkins-computer : Processing Active Silicon LFG VDig:
and this:
Hardware: MacPro1,1 @ 2660 MHz (x4), 1024 MB
Mar 2 21:22:03 ian-parkins-computer : Running OS Build: 8N1250
Mar 2 21:22:03 ian-parkins-computer : Active Silicon LFG VDig Installation Log
Mar 2 21:22:03 ian-parkins-computer : Opened from: /Volumes/as-lfg_vdig-1_5/as-lfg_vdig-1_5.pkg
Mar 2 21:22:03 ian-parkins-computer : It took 0.627795 seconds to finish launching.
Mar 2 21:22:05 ian-parkins-computer : Distribution: Active Silicon LFG VDig
Mar 2 21:22:05 ian-parkins-computer : Installation checks completed successfully.
you have to unistall completely LFG Vdig drivers and reinstall the
drivers reiceved from Richard.
Uninstalling the Video Driver (VDIG)
You will need to know the root/Administrator password to perform a driver uninstall.
1. Open up a terminal window from a 'Finder' window:
Run '/Applications/Utilities/Terminal'.
2. Type the following commands exactly as shown:
sudo rm -rf /Library/QuickTime/lfgvdigx.component
sudo rm -rf /System/Library/Extensions/cdapci.kext
sudo rm -rf "/Library/Documentation/Active Silicon"
exit
3. Then close the terminal window, shutdown and restart the computer.
your error probability is ref. a different library cdapci.kext for not INTEL MAC.
Roberto Novelli HighEndSystem dealer for ITALY
Product Manager & Technical Support
roberto_novelli@ianiro.com
IANIRO ALDO srl.
helpdesk : ianiro@ianiro.com
http://www.ianiro.com
Sede principale/Head Office : Via Ragusa, 5
Logistica/Logistics : Via Ragusa, 3
00040 Pavona (Roma)- ITALY
+39 06 9310198 ra tel
+39 06 93162162 fax