No HUD on Triple Head 2 Go

[Improve]

I had a setup with triple heads on a G5. And besides a mouse I got no HUD and nothing at all when running fullscreen.

Finaly Ruediger send me a PDF with information on triplehead stating that the G5 is not supported with triple head...

Please find enclosed this PDF

[samsc]

I had a setup with triple heads on a G5. And besides a mouse I got no HUD and nothing at all when running fullscreen.

Finaly Ruediger send me a PDF with information on triplehead stating that the G5 is not supported with triple head...

Please find enclosed this PDF

not true - as i have a show - 'Keane" tour - running on a quad g5 with both triple and dual heads. i think rob has 4 or 6 outputs. I cant remember.
http://www.keanemusic.com/

i also have a several g5's on other shows with these devices.
including 'waves' at the national theatre.
http://www.nationaltheatre.org.uk/?lid=20233

all the information from matrox has been inaccurate.
this pdf simply shows what matrox might have tested - not what works.

it depends on the graphics card - and it depends on the operating system.
there are no rules of thumb-
these devices also sometimes work at different resolutions on different machines.

if it works - it works - it if doesnt it doesnt.
you have to test it.
not every resolution is supported at every refresh rate - sometimes only 2400x800 works - sometimes only 1920x480 works.

[samsc]

I had a setup with triple heads on a G5. And besides a mouse I got no HUD and nothing at all when running fullscreen.

which g5 do you have - and what resolution did you try?

did you make sure you set up the resolution using system preferences BEFORE running catalyst - ?
You setup up the screen resolution BEFORE running catalyst - and you need to check you get a desktop output.

[Improve]

We had a double 2G G5 with the ATI 9800.

We ran from display propertys both outputs on 3072 x 768 with triple heads.. I hardly got that working from the Apple. Starting up Catalyst then en entering full screen.. No output what so ever and NO HUD's...

I was running m92 you send me for this show...

Ruediger tested this simultane in Germany on a G5 as well with another build and got the same result.

[RuedigerH]

The machine is on the road and will return to Arcus-warehouse tomorrow.
I will then sent/check the profile.

I got the same issues like Fons with a G5 Dual 2GHz with ATI X800XT and OS 10.4.8.

Ruediger

[emilianomorgia]

not sure what you talking about . I know that some time the second head give problem during start up . i had many problems with it .

It seams that osX do not recognize it .

[samsc]

not sure what you talking about . I know that some time the second head give problem during start up . i had many problems with it .

It seams that osX do not recognize it .

and what machine were you trying to use?

[samsc]

The machine is on the road and will return to Arcus-warehouse tomorrow.
I will then sent/check the profile.

I got the same issues like Fons with a G5 Dual 2GHz with ATI X800XT and OS 10.4.8.

Ruediger

thats a really old g5.

if it works it works - if it doesnt it doesnt.

depends on the maximum resolution that the x800 will support - you have to start at lowest resolutions - try 640x480 times 2 which is 1280x480 or 1920x480.
you must not expect these devices to work at high-resolution of 1024x768x3. or even 800x600x3

x800 might only support up to 2048x1536 - and thats the maximum. triple head or no triple head.
the specs and the limits are real.

Mobility™ Radeon® X800 Series supports the latest high resolution and wide-screen notebook displays with a flexible and easy-to-use interface for multiple display settings. ATI’s new LCD Enhancement Engine (LCD-EE™) allows for support of the latest high resolution and wide-screen notebook displays such as WXGA (1920x1200) and QXGA (2048x1536).

you are dealing with real hardware and software limits.
Many older graphics cards only every worked - even at their maximum up to 1920x1200 - and even that was really pushing it. it really was.
the matrox triple and dual head - pushes things well over these limits.

you have to test every single combination you intend using.
and if you try to work at this resolution on two screens -?

[samsc]

The machine is on the road and will return to Arcus-warehouse tomorrow.
I will then sent/check the profile.

I got the same issues like Fons with a G5 Dual 2GHz with ATI X800XT and OS 10.4.8.

Ruediger

yes and your graphics cards probably only work up to 2048x1536- if that?
and these are very old old machines.
you have to actually look at the specs of the machines...

---

there is no mystery here -

you are expecting these machines to do more than they are capable of....

this isnt a bug - in either hardware or software - you guys are pushing things over the limits....

[tharding]

I have noticed with the same machine (except with a 9800) that even using The new Edge blending and widescreen overlap features that the graphics card is the bottle neck.

I have even had one card the overheats and I need to remove the card directly above it to keep it working.

After that experience I don't think I would even try the Matrox boxes on a machine/card that old.

The cards were great in their day but that day has passed.

Cheers

Toby