No HUD on Triple Head 2 Go

[SourceChild]

I can see the HUD on the second output window but I have no content showing and no HUD when I go to full screen on the Triple Head 2 Go.
I have switched the TH2G to both catalyst outputs and left the second concurrent output disconnected and no success.
The TH2G works fine until I go to full screen. Then no HUD and no files showing.

[SourceChild]

Actually, I just realized the G5 I grabbed was one with a radeon 9800. So it was the GPU. However, for testing I dropped Rez down to 2400 x 600 (3 - 800x600) an I am noticing some pretty significant overhead.
One file DV NTSC and this is what I've got:
Graphics - 90% to 140%
Timing - 100% to 150%
This seems odd to me. Like I said, 1 DV file running only.

[samsc]

which os?
which g5?

anything at these resolutions is very very dependant on your system.

and also on any other monitors you have connected.

---

there isnt any significant overhead on recent machines - i have run 6 outputs on quad g5's and intel machines without problems.

---

please use the catalyst application menu - "Create pdf Profile", to create a pdf file with all your system information.

[samsc]

I can see the HUD on the second output window but I have no content showing and no HUD when I go to full screen on the Triple Head 2 Go.
I have switched the TH2G to both catalyst outputs and left the second concurrent output disconnected and no success.
The TH2G works fine until I go to full screen. Then no HUD and no files showing.

did you read how to set up and use the triple head to go in the 'whats new document? from m67'

http://homepage.mac.com/goatee/.cv/g...07.pdf-zip.zip

do you understand what this does - and how it works?

[SourceChild]

I absolutely know how this device works. That is why when I realized which video card I had, I realized the rez was too High for it.

If you remember, I was the one who was first mentioned using this device before it was released. I've used them plenty of times for other things but only since you added the code for doing the screen ratios have I been using them with Catalyst. Incidentally, I also use them with the edge blending feature as well since many of my set designs are comprised of irregular stretched spandex.

The circumstances today were specific to setting up a machine with one of the TH2G loading the new build you just released.

I thought I might have discovered a bug in the new build when I dropped the rez to what was within the range of the video card and noticed the high processing overhead.

Here is the PDF attached.

[samsc]

thanks for the profile Todd.

its very complex working through things that can and do happen with third party hardware.

there are many many combinations of devices systems, hardware - and its not possible to provide any 'rules of thumb' when things dont work.

you probably havent discovered a 'bug' but a combination of things that doesnt work with a specific system setup. ( and there will be many of them ). just as there are also many combinations that do work.

So -its really really important that i get as many details as possible.

---

what you described happens on early and older systems when their display resolutions are not setup correctly. or two monitors are connected at different refresh rates - and other things like this.

[samsc]

todd.

one of your monitors is 1280x1024 at 60Hz?
the other 3072x768 at 75Hz?

you have installed some older ATI display drivers? I noticed you have something called ATI monitor running?

-----

running monitors at different refresh rates is almost always a problem - you need to find a resolution that works - or combination of resolutions and refresh rates that work.

also suggest you uninstall any ATI drivers or monitors.
As unless these are very recent - they are likely to be the source of bugs in graphics.
But they might not. There are too many combinations of things.

---

This isnt going to fix anything - but suggest also you install 10.4.8

[Improve]

I had a setup with triple heads on a G5. And besides a mouse I got no HUD and nothing at all when running fullscreen.

Finaly Ruediger send me a PDF with information on triplehead stating that the G5 is not supported with triple head...

Please find enclosed this PDF

[SourceChild]

one of your monitors is 1280x1024 at 60Hz?
the other 3072x768 at 75Hz?

Yeah, the moment I started troubleshooting I killed the 2nd mon and ran the TH2G by itself on the 9800. This helped obviously.

you have installed some older ATI display drivers? I noticed you have something called ATI monitor running?

Yeah, that's the problem with pulling a machine out of an old render farm.

running monitors at different refresh rates is almost always a problem - you need to find a resolution that works - or combination of resolutions and refresh rates that work.

Yes, and there is that funky thing with the TH2G where certain refresh rates are not supported at certain screen sizes.

also suggest you uninstall any ATI drivers or monitors.
As unless these are very recent - they are likely to be the source of bugs in graphics.
But they might not. There are too many combinations of things.

I don't even know why they are on the box except that the systems was updated by someone who apparently used the ATI cd to install a driver that was older than the tiger driver.

This isnt going to fix anything - but suggest also you install 10.4.8

What's the advantage of 10.4.8?