hola richard
1 - i can make my library fixture for pixelmad (in catalyst v4)?
2 - i can use pixelmad for send video dmx data to cmy moving head (exp. st. command)?
b.r.
adrian
Printable View
hola richard
1 - i can make my library fixture for pixelmad (in catalyst v4)?
2 - i can use pixelmad for send video dmx data to cmy moving head (exp. st. command)?
b.r.
adrian
Artnet should merge in LTP mode . So if hog give always the CYM to 0 and you send the CMY value in the same universe same channel it should merge it .
I'm not 100% sure about this but if you test it you will see your self .
Repeat NOT SURE 100% test it b4 use it .
may be Richard know .
I wish to get fixture editor as well
ArtNet is HTP as far as I know.
Ross
Go on Pixel Mad and look at the UNIVERS output . you will see that if there are no changes there will be any data send . That it's L T P
Do you mean it's possible to marge ?Quote:
Originally Posted by rosswill
Yes ArtNet will merge on HTP basis
my display of artnet in pixelmad will just display whatever the last packet it received - its neither HTP nor LTP.
Whether something is HTP or LTP will depend on the output box used, and whether it supports this.
pixelmad and catalyst use the same dmx channels and the same parameters.Quote:
Originally Posted by adrian fischer
---
which CMY head?
hola richard, i need Moodlight 64 PXL Matrix (traxon) library for pixelmad.
i can make custom library?
gracias
a
what is the spec of the fixture?
i can do custom fixture for you.
Hi all
i'm chasing the same fixture library for the tile 64 panel, which is an 8x8,
1-192 top - bottom, left - right.
Would it be possible to get a fixture made?
Cheers Aaron
sure.
is it normal RGB?
yes as far as i know
i added an 8x8 fixture.
where can i download the fixture from
it will be in a future build.
Do you need this now?
Yes we do!
Cheers
Toby
did you see this in m95?
Yes but it still doesn't start in the correct corner. We need the Top Left travelling downwards. I notice your Test RGB 1b does this.
Its like there needs to be two parameters for direction.
First is start point - top Left, top Right, Bottom Left, Bottom Right
Second is Direction - Up, Down, Left, Right
Cheers
Toby
there is an orientation attribute-
can you try using the TOPLEFT or BOTTOMLEFT - see if this helps.Code:<Fixture menuname="Test RGB 1" uniqueid="XRF1" excelexportid="RFB1" pixelwidth="4" pixelheight="5" output="RGB" channelcount="60" orientation="TOPLEFT"/>
<Fixture menuname="Test RGB 1b" uniqueid="XRV1" excelexportid="RFV1" pixelwidth="4" pixelheight="5" output="RGB" channelcount="60" orientation="BOTTOMLEFT"/>
See my post in the "Grid Fixtures" Thread
Cheers
Toby