yeh - but in basic terms - you can't put a 1080p 50 or 60 signal in to it from another computer...
Printable View
yeh - but in basic terms - you can't put a 1080p 50 or 60 signal in to it from another computer...
Mac OS 10.6.5
on Octo 2010 computer
Decklink Intensity
Intensity software 3.8.1
Catalyst
All working just fine
HDMI
I can even capture DVI thru the HDMI input.... ( converts to video )
thats depends on decklink bandwidth and hardware support - and their designs restrictions - and which version of hdmi spec - im not an expert
http://en.wikipedia.org/wiki/HDMI
the kona LHi seems to be claiming something like this on hdmi input:
http://www.aja.com/products/kona/konalhi/specs.phpQuote:
3Gb SD and HD-SDI, SMPTE-259/292/296/424
HDMI v1.3, 30/36 bits/pixel, RGB or YUV, 2.25Gbps, SD,HD, 1080p50/60
the kona 3g claims even greater input sizes
http://www.aja.com/products/kona/kona3g/specs.php
I had a go at my cat just there. Running now in 32bit and also with catv4.4 (m329) running just fine. Decklink card is work beautifully with one or two exceptions:
These inputs work fine:
720p 50
720p 60
1080i 59.94
1080p 24
1080p 23.976
These do not:
720p 59.94
1080i 50
Also, since I did all this, now my LFG4 card will not work. Nor will it come up under inputs. What it does say however is Phoenix, which I don't have. If I click on any of the "phoenix" inputs it crashes and sometimes crashes the computer too. Now I'm really confused? The only thing I did was re-arrange the PCIe cards. Could that be it?
Aside from that its slick
All fine now, both lfg4 and decklink running fine. must check 720p 59.94 & 1080i 50 to see if all is well with them