Where did you get the 19" alu mountings which you use for the macpro and drawer? And was the 19" frame shocmounted? Great photo's!
Printable View
I made a few changes and I have been busy working on another project. I will be in touch with you soon once I have ironed out my ideas.
Basically, I am trying to design a roadcase that has a 2' x 2' x 2' cube footprint.
Simon made a comment about "easy to troubleshoot." So I thought more and changed my ideas.
The idea I had was to have an 8-core Mac Pro, 2 TH2G (for 6 outputs), 2 Marshal 3 screen rack LCD, and an easy access port for getting to the VDAs, and converters.
I am still debating on the output signal
The problem is that different people have different capabilities. I prefer using SDI since many projectors have SDI inputs but as a secondary I would prefer DVI and use ethernet extenders.
- 6 5-wire BNC ports
- 6 DVI Ports
- 6 RJ-45 with internal DVI over ethernet Extenders
- 6 SDI outputs wih 6 internal DVI to SDI converters
I am even considering a KVM solution rack with built in 15" Monitors, keyboard and mouse.
Obviously the more devices in the signal path the greater the potential for failure but if I can enhance the efficiency of a system, it is tremendous in value.
This is a subject I would encourage a great deal of feedback on.
Yes the internal frame is shouckmounted.
The single rack has a custom made Rackmount frame.
The construction is VERY simple - its a box with re-enforces alu edges and an equal angle alu strip on each side which allows it to be bolted in to any 19in rack. The Mac part is foamed on each side. The drawer is for cables etc. However, by some fluke, we purchased monitors that actually fit in the drawer!! (I'll post a pic on my gallery) Unfortunately, sony dont make those monitors any more :(
The Dual rack has a 19in dual server mount - which is no longer available from the original supplier - as they went bust. Im trying to get a local aluminium fabricator to 'enhance' the design - for the moment, its cheaper to use a dual box version (similar to the single) but with no drawer
If anyone want to purchase a single or dual insert (or whole system) feel free to contact me for a quote.
Simon
Simon Pugsley
SNP Productions Ltd (UK)
Mobile: +44 (0)7958 390034
simon@snp-productions.co.uk
Here are my two Catalyst cases built by Engineered Case in Toronto Ontario Canada.
8-ru shock-mounted rack rail,
side compartment for cables etc
keyboard/console shelf
drawer
shock-mounted vertical Mac position
custom foam for 2 19" widescreen monitors
front/back lids
overall height just under 4'
-s
They look really well designed...
I like the rackspace
Do you have any pics of the rear and the bit under the drawer.
S
in my opinion Catalyst Rack don't need to be a workstation . Because Catalyst it's not a workstation .
Catalyst it's just a server you don't need to operate it during showtime and you don't need monitor feedback .
What I'll like to suggest you if are thinking to do some investment it's to buy a little Mac Book ( around 1000 euro ) Two monitors ( around 700 euro ) And if you are using 2 TH2G 6 monitor will cost more then 2 macbooks .
monitor are a waste of space and you don't need it to operate Catalyst .
Also by not using the monitor you save money for the video distributors .
Read this http://chaldee1.gotadsl.co.uk/~richa...ead.php?t=1117
Also think any monitor you are going to buy have a specific size , not the screen it self , talking about the monitor . If you build the flight case around the monitor it self , you will see that you spend money for nothing . Monitor a super consumer , in half year time you will be not able to found same monitor size in the market , and your flightcase will be useless to store your monitors .
Hope this help
A small self contained rack (with TH2G) can sit on the des in my office or in a hotel room along with my Hog PC. However, you're point is legitimate.
Got one, do use it. In fact, have considered a programmable DMX router so I can switch the macbook DMX fast to each Catalyst in the rig.
By not using monitors, I eliminate a failure point in the line by using distributors. Very good point.
Marshall makes Rack Mount LCD monitors that will receive DVI and VGA. They have 2 screen and three screen models. The range from $2000 to $3000 USD each. In a year or two there will be different models but the rack footprint and profile will not change.
Yes these are freakin expensive but it would be a turnkey rack that is instantly available.
My philosophy is: If I can save a client can save a potential $10,000 per day expense because I have technology that can setup and program faster as well as program off site, then it means I have become more valuable and therefore can reap higher profitability.
I disagree
Catalyst IS the centre of operation in a number of (not all) show setups. Not only is it the replay system, but the matrix switching, projector control etc.
You may not need to 'operate' catalyst during showtime - but you will need to set it up - in some cases, I've had config changes at each venue. therefore you need monitors! A decent DVI DA is £100-160
2 x macbooks may be cheaper - but performance is nothing compared to a well spec'd MacPro. From my personal experience of touring Laptops - i wouldn't suggest it - security, vunerability, increased setup time. Fine if you're a small operator - but go look at any big video rental company around the world - theres a reason they've all purchased mac-pros not laptops....
Ive actually used the same size flightcase for a number of different 17in monitors over the last few years - all i've had to do is change the foam inside slightly - which is fairly easy and costs nothing.
Once again - this discussion comes down to the requirement for your show. If you touring with no equipment (ie venue provided) then a laptop makes sense.
If you are touring with a full lighting rig, sound, and video screens or projection, then a well designed case and a mac-pro would seem more sensible.
Its not necessarily all about the mac - You still have to consider scan converters, artnet equipment, UPS, and peripheral equipment that you may use with catalyst and for the requirements of your show.
my catalyst rack and iPC actually fits in the back of my car...