PDA

View Full Version : pixelmad library



adrian fischer
26-08-2006, 07:30 PM
hola richard
1 - i can make my library fixture for pixelmad (in catalyst v4)?
2 - i can use pixelmad for send video dmx data to cmy moving head (exp. st. command)?

b.r.

adrian

emilianomorgia
27-08-2006, 12:13 PM
Artnet should merge in LTP mode . So if hog give always the CYM to 0 and you send the CMY value in the same universe same channel it should merge it .

I'm not 100% sure about this but if you test it you will see your self .

Repeat NOT SURE 100% test it b4 use it .

may be Richard know .


I wish to get fixture editor as well

rosswill
28-08-2006, 02:04 PM
ArtNet is HTP as far as I know.

Ross

emilianomorgia
29-08-2006, 03:53 AM
Go on Pixel Mad and look at the UNIVERS output . you will see that if there are no changes there will be any data send . That it's L T P

emilianomorgia
29-08-2006, 04:06 AM
ArtNet is HTP as far as I know.

Ross

Do you mean it's possible to marge ?

rosswill
02-09-2006, 11:09 AM
Yes ArtNet will merge on HTP basis

samsc
05-09-2006, 12:18 PM
my display of artnet in pixelmad will just display whatever the last packet it received - its neither HTP nor LTP.

Whether something is HTP or LTP will depend on the output box used, and whether it supports this.

samsc
05-09-2006, 12:19 PM
hola richard
1 - i can make my library fixture for pixelmad (in catalyst v4)?
2 - i can use pixelmad for send video dmx data to cmy moving head (exp. st. command)?

b.r.

adrian

pixelmad and catalyst use the same dmx channels and the same parameters.

---

which CMY head?

adrian fischer
05-09-2006, 04:41 PM
hola richard, i need Moodlight 64 PXL Matrix (traxon) library for pixelmad.

i can make custom library?

gracias
a

samsc
05-09-2006, 09:19 PM
what is the spec of the fixture?

i can do custom fixture for you.

azza
11-10-2006, 09:37 AM
Hi all
i'm chasing the same fixture library for the tile 64 panel, which is an 8x8,
1-192 top - bottom, left - right.
Would it be possible to get a fixture made?
Cheers Aaron

samsc
11-10-2006, 04:25 PM
sure.

is it normal RGB?

azza
12-10-2006, 06:04 AM
yes as far as i know

samsc
12-10-2006, 07:18 PM
i added an 8x8 fixture.

azza
13-10-2006, 01:16 AM
where can i download the fixture from

samsc
26-10-2006, 12:29 PM
it will be in a future build.

Do you need this now?

tharding
08-12-2006, 12:53 PM
Yes we do!

Cheers

Toby

samsc
15-12-2006, 04:02 PM
did you see this in m95?

tharding
15-12-2006, 11:33 PM
Yes but it still doesn't start in the correct corner. We need the Top Left travelling downwards. I notice your Test RGB 1b does this.

Its like there needs to be two parameters for direction.

First is start point - top Left, top Right, Bottom Left, Bottom Right
Second is Direction - Up, Down, Left, Right

Cheers

Toby

samsc
16-12-2006, 11:00 AM
there is an orientation attribute-


<Fixture menuname="Test RGB 1" uniqueid="XRF1" excelexportid="RFB1" pixelwidth="4" pixelheight="5" output="RGB" channelcount="60" orientation="TOPLEFT"/>
<Fixture menuname="Test RGB 1b" uniqueid="XRV1" excelexportid="RFV1" pixelwidth="4" pixelheight="5" output="RGB" channelcount="60" orientation="BOTTOMLEFT"/>


can you try using the TOPLEFT or BOTTOMLEFT - see if this helps.

tharding
17-12-2006, 04:09 AM
See my post in the "Grid Fixtures" Thread

Cheers

Toby