View Full Version : pixelmad library
adrian fischer
26-08-2006, 06:30 PM
hola richard
1 - i can make my library fixture for pixelmad (in catalyst v4)?
2 - i can use pixelmad for send video dmx data to cmy moving head (exp. st. command)?
b.r.
adrian
emilianomorgia
27-08-2006, 11:13 AM
Artnet should merge in LTP mode . So if hog give always the CYM to 0 and you send the CMY value in the same universe same channel it should merge it .
I'm not 100% sure about this but if you test it you will see your self .
Repeat NOT SURE 100% test it b4 use it .
may be Richard know .
I wish to get fixture editor as well
rosswill
28-08-2006, 01:04 PM
ArtNet is HTP as far as I know.
Ross
emilianomorgia
29-08-2006, 02:53 AM
Go on Pixel Mad and look at the UNIVERS output . you will see that if there are no changes there will be any data send . That it's L T P
emilianomorgia
29-08-2006, 03:06 AM
ArtNet is HTP as far as I know.
Ross
Do you mean it's possible to marge ?
rosswill
02-09-2006, 10:09 AM
Yes ArtNet will merge on HTP basis
samsc
05-09-2006, 11:18 AM
my display of artnet in pixelmad will just display whatever the last packet it received - its neither HTP nor LTP.
Whether something is HTP or LTP will depend on the output box used, and whether it supports this.
samsc
05-09-2006, 11:19 AM
hola richard
1 - i can make my library fixture for pixelmad (in catalyst v4)?
2 - i can use pixelmad for send video dmx data to cmy moving head (exp. st. command)?
b.r.
adrian
pixelmad and catalyst use the same dmx channels and the same parameters.
---
which CMY head?
adrian fischer
05-09-2006, 03:41 PM
hola richard, i need Moodlight 64 PXL Matrix (traxon) library for pixelmad.
i can make custom library?
gracias
a
samsc
05-09-2006, 08:19 PM
what is the spec of the fixture?
i can do custom fixture for you.
Hi all
i'm chasing the same fixture library for the tile 64 panel, which is an 8x8,
1-192 top - bottom, left - right.
Would it be possible to get a fixture made?
Cheers Aaron
samsc
11-10-2006, 03:25 PM
sure.
is it normal RGB?
samsc
12-10-2006, 06:18 PM
i added an 8x8 fixture.
where can i download the fixture from
samsc
26-10-2006, 11:29 AM
it will be in a future build.
Do you need this now?
tharding
08-12-2006, 11:53 AM
Yes we do!
Cheers
Toby
samsc
15-12-2006, 03:02 PM
did you see this in m95?
tharding
15-12-2006, 10:33 PM
Yes but it still doesn't start in the correct corner. We need the Top Left travelling downwards. I notice your Test RGB 1b does this.
Its like there needs to be two parameters for direction.
First is start point - top Left, top Right, Bottom Left, Bottom Right
Second is Direction - Up, Down, Left, Right
Cheers
Toby
samsc
16-12-2006, 10:00 AM
there is an orientation attribute-
<Fixture menuname="Test RGB 1" uniqueid="XRF1" excelexportid="RFB1" pixelwidth="4" pixelheight="5" output="RGB" channelcount="60" orientation="TOPLEFT"/>
<Fixture menuname="Test RGB 1b" uniqueid="XRV1" excelexportid="RFV1" pixelwidth="4" pixelheight="5" output="RGB" channelcount="60" orientation="BOTTOMLEFT"/>
can you try using the TOPLEFT or BOTTOMLEFT - see if this helps.
tharding
17-12-2006, 03:09 AM
See my post in the "Grid Fixtures" Thread
Cheers
Toby
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.