PDA

View Full Version : Catalyst 4.05 m50 UB FC3 - Upgraded features



samsc
16-05-2006, 05:34 PM
Catalyst 4.05 m50

Upgraded feature set

Pro 12 Layers, 5 sub-mixes, 10 universes of DMX
DV 8 layers 4 sub-mixes, 4 universes of DMX
Express 4 layers, 2 sub-mixes 4 universe of DMX

All versions have Upgradeable DMX to 50 universes.

( for dmx upgrade pricing and information contact me directly - richard at samsc.com )

Final candidate 1:
http://homepage.mac.com/goatee/.Public/Catalyst%204.05_m50UB_HD.zip
---

One version runs all dongles.
10.3.9 or later.

this is a universal binary build - ppc and intel - and will require the latest dongle driver from aladdin

Woodj32177
16-05-2006, 07:12 PM
Hey Richard,
Should I be able to run this without the blue bars and red flash?
My dongle is upgraded to 4.0, and runs 4.01 just fine.
Does it not recognise the dongle due to this being a beta?
Thanks
Joshua Wood
Service Manager
Ruehling Associates Inc.

samsc
16-05-2006, 07:18 PM
unless i broke something - it should work - what does the install/register dialog say?

samsc
16-05-2006, 07:23 PM
in my quick testing it worked for me- what are your dongle id's and serial numbers?
email them to me

Woodj32177
16-05-2006, 07:24 PM
System ID is listed.
Dongle ID-No Dongle
Serial No- None
Feature Set- Catalyst Demo SAMSC Lite

and at the bottom it does say Driver needs Updating.
So I will try updating the driver,
Kinda odd that it works fine with 4.01 but not with 4.05

samsc
16-05-2006, 07:27 PM
which os?
tiger?

did you download the latest aladdin drivers?

http://chaldee1.gotadsl.co.uk/~richardb/upload/showthread.php?t=835

Woodj32177
16-05-2006, 07:35 PM
Thanks Richard,
Updating the Dongle Driver took care of it.
Josh

samsc
16-05-2006, 07:44 PM
thanks.

there are also a small number of bug fixes in this release.

samsc
16-05-2006, 07:52 PM
Thanks Richard,
Updating the Dongle Driver took care of it.
Josh

this is a universal binary build - with support for intel - it will need the latest dongle build from aladdin.

CatalystGirl
16-05-2006, 08:53 PM
Hey Richard,

I like the changes you made to the DMX Artnet window. The Universe Map is great. This version is very clean. Good work!

Leah Durrett

samsc
16-05-2006, 11:09 PM
Hey Richard,

I like the changes you made to the DMX Artnet window. The Universe Map is great. This version is very clean. Good work!

Leah Durrett

thanks.

the dmx artnet changes have been there for a few weeks now.

means you have much more flexibilty with the distribution and layout of artnet networking and infrastructure- important in large shows.
i just did a 50 universe show in argentina

CatalystGirl
17-05-2006, 02:09 PM
I would like to see that! :eek:

samsc
17-05-2006, 02:36 PM
pictures from 50 universe show.

a 50 universe show in argentina for the show 'Showmatch'

pixelmad is running 50 universes of dmx to the tubes at the back of the set.

CatalystGirl
17-05-2006, 03:19 PM
Nice work! Great set.

samsc
19-05-2006, 12:37 PM
Nice work! Great set.

gustavo did a great job.

Woodj32177
19-05-2006, 03:14 PM
hey Richard,
One more question/Problem with 4.05
I can't seem to get it to save my setting each time it starts up.
I am sure its something to do with my installation,
but I am not sure how to fix it.
Every time I start Catalyst I have to reenter all my Dmx addresses, and rescan my library.
How can I fix this?
Thanks!
Joshua Wood
Service Manager
Ruehling Associates Inc.

samsc
20-05-2006, 12:44 AM
this is always a file permissions issue.

where did you put the application?

the application needs permission to write files to the folder it resides in.

this is not always the case with users who dont have administrative permissions.

Woodj32177
22-05-2006, 06:37 PM
Thanks,
That was the problem,
I appreciate the help
Josh

samsc
22-05-2006, 08:11 PM
i added an error message to the software.
but with these things - sometimes this doesnt help much.

roberto_novelli
24-05-2006, 03:15 PM
System ID is listed.
Dongle ID-No Dongle
Serial No- None
Feature Set- Catalyst Demo SAMSC Lite

and at the bottom it does say Driver needs Updating.
So I will try updating the driver,
Kinda odd that it works fine with 4.01 but not with 4.05

Hi Richard after installation 4.05
I have same problem Woodj32177 but i use 10.3.9 OS...
wich drivers i need to install????? :confused:
The Dongle is recognize with V3.31_h21_PRO and in the install register
show "feature set" Catalyst V4 PRO with dongle ok (the serial number of the
dongle is new one). :rolleyes:
Thank for your attention and bye

ROBERTO NOVELLI

samsc
24-05-2006, 03:20 PM
the aladdin dongle works on 10.3.9 - i believe

install the same driver

roberto_novelli
25-05-2006, 02:05 PM
Thanks Richard now 4.05 working fine. :D
In order return to use V3 what i do???? :confused:
This is question for my customer.... :)
Thanks a lot for this powerfull release :D :D :D

ROBERTO NOVELLI Resp. Tech. Dept.
Ianiro Aldo srl Company
roberto_novelli@ianiro.com
ianiro_lab@ianiro.com
www.ianiro.com

samsc
25-05-2006, 02:39 PM
v4 dongles still work with v3 if you use 3.32

roberto_novelli
25-05-2006, 03:41 PM
v4 dongles still work with v3 if you use 3.32

Thanks Richard.. for quickly replay. :D

ROBERTO NOVELLI Resp. Tech. Dept.
Ianiro Aldo srl Company
roberto_novelli@ianiro.com
ianiro_lab@ianiro.com
www.ianiro.com

Highend System Dealer for Italy

roberto_novelli
25-05-2006, 04:44 PM
Hi Richard during the startup of V4.06_m47
Show this:

Current OS version 10.3.9
Need System 10.4.5 or greater
Current Quicktime version 7.1
Need Quicktime 7.0 or greater

and the program don't start automatically

I use 10.3.9 and all applications is upgrade at last version.
Quicktime is version 7.1....
Is possible take out this message????

Thanks in advance

ROBERTO NOVELLI Resp. Tech. Dept.
Ianiro Aldo srl Company
roberto_novelli@ianiro.com
ianiro_lab@ianiro.com
www.ianiro.com

Highend System Dealer for ITALY

samsc
25-05-2006, 05:11 PM
Is possible take out this message????

Thanks in advance


ill check to see whats happening.

markjlights
06-07-2006, 09:06 PM
I just downloaded and tried to run v4.05.
The software seems to start up fine until it begins to scan for objects and then it causes my primary monitor to go black. The only way out that I can find is to quit. Any ideas?

roberto_novelli
07-07-2006, 09:52 AM
Hi mark ...sound like a resolution or refresh rate monitor problem.
Normally catalyst start resolution at 1024 x 768 at 75 hertz this frequence
not is good for old monitors. put this monitor like secondary (you can set different refresh time after start catalyst) and put on primary monitor new one.
bye.

ROBERTO NOVELLI Resp. Tech. Dept.
Ianiro Aldo srl Company
roberto_novelli@ianiro.com
ianiro_lab@ianiro.com
www.ianiro.com
tel.+39.06.93.10.198
fax+39.06.93.162.162

************************************************** ************************************************** ******************
Le informazioni contenute in questo messaggio e nei suoi allegati sono confidenziali e destinate esclusivamente alla persona o alla societÃÂ* in indirizzo. Ogni inoltro, trasmissione, diffusione o altro uso di queste informazioni a terzi non destinatari sono proibiti salvo espresso consenso di Ianiro. Se ricevete questa comunicazione per errore, contattate il mittente e cancellate le informazioni da ogni computer.
The information contained in this message and in the attachments are confidential and are intended only for the person or entity to which it is addressed. Any review, disclosure, retransmission, dissemination or other use of it is prohibited without the express consent of Ianiro. If you received this in error, please contact the sender and delete the material from any computer.
************************************************** ************************************************** ******************

FxDrew
07-07-2006, 02:28 PM
I just downloaded and tried to run v4.05.
The software seems to start up fine until it begins to scan for objects and then it causes my primary monitor to go black. The only way out that I can find is to quit. Any ideas?

Something to try:
Catalyst has a function that will make it go into full screen mode at the program startup. When at the black screen, hit the "s" key to exit full screen mode on output 1 or the "f" key to exit full screen mode on output 2. If you wish to disable this function for now, the setting is located on the Layer mix options for each output on the GUI.

samsc
13-07-2006, 12:39 AM
I just downloaded and tried to run v4.05.
The software seems to start up fine until it begins to scan for objects and then it causes my primary monitor to go black. The only way out that I can find is to quit. Any ideas?

scan for objects - you mean 3d objects?

any more information?