PDA

View Full Version : Pixelmad version 2. f24 video input in issue



samsc
06-03-2005, 08:56 AM
( this post originally made by ross, i tried to move it - something went wrong, had to redo the thread )

When running 2 show cues which change a layer from video input to a library file, Pixelmad does not switch out of video input mode, even though the dmx values have altered. If you select the layer and change to another library and back again it jumps out of video input mode. Running the cues in reverse, from a lib file to video in there is no problem.

samsc
06-03-2005, 08:56 AM
maybe the file/library combination you switched to didnt exist?

samsc
06-03-2005, 08:57 AM
No the file and library existed. Clearing the console editor having changed to a new library confirms this as the dmx values return as they were in the programed cue.

samsc
06-03-2005, 08:57 AM
Originally Posted by rosswill

When running 2 show cues which change a layer from video input to a library file, Pixelmad does not switch out of video input mode, even though the dmx values have altered. If you select the layer and change to another library and back again it jumps out of video input mode. Running the cues in reverse, from a lib file to video in there is no problem.

so you have to tell it to change to a layer twice before it switches out of video input mode?

samsc
06-03-2005, 08:58 AM
Precisely, with another dmx value other than the original target file between each send command.