View Full Version : XServe RAID
samsc
06-02-2005, 02:14 AM
Hope to complete some real world tests with Catalyst using the XServe RAID in the next couple of weeks,
http://www.apple.com/xserve/raid/specs.html
samsc
03-03-2005, 09:05 AM
Our XServe RAID seems to work great with only a couple of media drives in one half of the RAID.
Still to be fully confirmed.
We get 6 layers playback at standard definition without any issues -
So it seems that it might be possible to support at least 2 macs with good playback from a single XServe raid - as it has dual fibre channel outputs.
samsc
03-03-2005, 02:52 PM
We have a fibre channel switch and some fibre channel cards on order, and intend to test the XSAN disc operating system with multiple servers connecting to the same raid set asap.
I have no idea how well it might work. We have quite a few tests to run.
Single access to the XServe Raid worked quite well on first tests.
samsc
09-03-2005, 08:33 AM
Setting up the XServe RAID was MUCH easier than i expected.
The fibre channel card and interface seemed largely foolproof, no settings required.
The configuration utility worked very easily - after I set the network settings to use DHCP and disconnected the local DHCP server.
Playback performance was good with standard definition.
Using 2 discs in a RAID 0 configuration, we were able to play 7 layers of dv movies.
So the aggressive caching seems to work.
I didnt expect it to work so well.
peppe
09-03-2005, 09:04 AM
Setting up the XServe RAID was MUCH easier than i expected.
I didnt expect it to work so well.
This sounds great! Have you tested any Mjpeg at 1024x768 at highest quality,progressive???
samsc
09-03-2005, 09:30 AM
This sounds great! Have you tested any Mjpeg at 1024x768 at highest quality,progressive???
highest quality is uncompressed?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.