PDA

View Full Version : Fixture help please



MattMills
22-02-2011, 11:30 PM
Hello everyone, I am in desperate need of help with a fixture for Pixelmad. I have a chance to demo the Catalyst / Pixelmad on a big wall of LED pars. They are currently just running them from the Grand MA but I have a very good chance to put a Catalyst on the job if I can dazzle them. Heres the problem though, they are running these LED pars in full 9 channel mode. That mode has RGBW plus strobe and other functions. Is it possible to get a profile for it that would work with it in that mode? Otherwise I would have to change the modes on about 300 of these LED pars. Heres the info on them....

Elation ELAR LED Par
Channels...
1-Red
2-Green
3-Blue
4-White
5-Color Temp
6-Color Macros
7-Internal Programs
8-Strobe
9-General Dimming / Speed

The website for this fixture is.... http://www.elationlighting.com/ProductDetails.aspx?ItemNumber=1670&MainId=1&Category=LED%20Lighting

Thanks in advance for any help, I apologize for not knowing how to make a fixture in Catalyst. Matt

Mr_P
23-02-2011, 10:19 AM
See Post:
http://chaldee1.gotadsl.co.uk/~richardb/upload/showthread.php?p=9936#post9936